ALLmeter USB Rechargeable Digital Angle Finder with Laser (Model ALL066)

1. හැඳින්වීම

The ALLmeter Digital Angle Finder with Laser, Model ALL066, is a high-precision inclinometer designed for accurate angle measurements in various applications, including woodworking, construction, and general DIY tasks. This device combines advanced digital measurement technology with practical features to enhance efficiency and accuracy.

ප්රධාන ලක්ෂණ:

• High-Precision Measurement: Achieves 0.05° resolution and ±0.2° accuracy for reliable readings.
• 4-Sided Magnetic Base: Equipped with strong rare-earth magnets on all four sides for secure attachment to metal surfaces, enabling hands-free operation.
• Dual Laser Lines: Features two Class 2 certified laser lines (less than 1mW power) for extended projection and precise alignment.
• USB-C නැවත ආරෝපණය කළ හැකි: Integrated 340mAh rechargeable battery provides up to 7 hours of operation and charges fully in approximately 2.5 hours via Type-C port.
• Backlit Reversible Display: High-contrast black-on-white display ensures clear visibility in various lighting conditions. The display automatically rotates for easy reading from any orientation.
• අතිරේක කාර්යයන්: Includes data hold, degrees/percentage conversion, zeroing for relative measurements, and automatic shut-off.
• කල් පවතින නිර්මාණය: IP54 rated for dust and light rain resistance.

Figure 1: ALLmeter Digital Angle Finder and included accessories.

2. පැකේජ අන්තර්ගතය

• ALLmeter Digital Angle Finder (Model ALL066)
• USB-C ආරෝපණ කේබලය
• බෑග් රැගෙන යන්න
• පරිශීලක අත්පොත

රූපය 2: සම්පූර්ණ පැකේජ අන්තර්ගතය.

3. පිහිටුවීම

3.1 උපාංගය ආරෝපණය කිරීම

Before initial use, fully charge the Digital Angle Finder. Connect the provided USB-C cable to the charging port on the device and to a standard USB power source (e.g., computer, wall adapter). The battery indicator on the display will show charging status. A full charge takes approximately 2.5 hours.

Figure 3: Connecting the USB-C charging cable.

4. මෙහෙයුම් උපදෙස්

4.1 බලය සක්රිය / අක්රිය

ඔබන්න සක්රිය / අක්රිය button to turn the device on. The backlit display will illuminate. To turn off the device, press and hold the සක්රිය / අක්රිය button. The device also features an automatic shut-off function after 3 minutes of inactivity to conserve battery life.

4.2 Basic Angle Measurement

Place the base of the Digital Angle Finder firmly on the surface you wish to measure. The display will show the angle relative to gravity. The display automatically rotates for easy reading when the device is inverted.

Figure 4: Clear and readable backlit display.

4.3 Zeroing for Relative Measurement

To measure a relative angle, place the device on your reference surface and press the ZERO button. The display will reset to 0.00°, allowing you to measure the angle of subsequent surfaces relative to your chosen reference.

4.4 Unit Conversion (Degrees / Percentage)

ඔබන්න Tilt% button to switch between angle measurement in degrees (°) and percentagඉ (%).

Figure 5: Switching between degrees and percentagඊ මැනීම.

4.5 දත්ත රඳවා ගැනීමේ කාර්යය

To freeze the current reading on the display, briefly press the අල්ලා ගන්න button. Press it again to release the hold and resume live measurement.

Figure 6: Using the HOLD function to save a reading.

4.6 Using the Laser Lines

The device features dual laser lines for extended alignment. To activate the laser, press the සක්රිය / අක්රිය button multiple times:

• Press once: Activates the right laser.
• Press twice: Activates the left laser.
• Press three times: Activates both lasers (right + left).
• Press four times: Disables all lasers.

The laser lines are useful for aligning objects such as shelves, tiles, or long boards over a distance.

Figure 7: Dual laser lines in use for precise alignment.

4.7 චුම්බක පදනම

The ALLmeter Digital Angle Finder features strong magnets on all four sides, allowing it to securely attach to various metal surfaces. This enables hands-free operation, which is particularly useful when working on saw blades, metal beams, or pipes.

Figure 8: Magnetic base attachment to a metal frame.

5. නඩත්තු කිරීම

5.1 පිරිසිදු කිරීම

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the charging port cover is securely closed to maintain IP54 rating.

5.2 ජලය සහ දූවිලි ප්‍රතිරෝධය

The device is IP54 rated, meaning it is protected against dust ingress and splashing water from any direction. It is suitable for use in environments with light rain or dust, but it should not be submerged in water.

Figure 9: IP54 rating for dust and water resistance.

6. දෝශ නිරාකරණය

6.1 "ERR" Display

If the display shows "ERR", it indicates that the angle of the measuring face is inclined by more than 30 degrees from the back or front. Adjust the device's position to be within the operational range.

Figure 10: "ERR" message indicating excessive tilt.

6.2 උපාංගය ක්‍රියාත්මක නොවේ

• බැටරිය ආරෝපණය වී ඇති බවට වග බලා ගන්න. USB-C කේබලය භාවිතයෙන් උපාංගය බල ප්‍රභවයකට සම්බන්ධ කරන්න.
• ඔබා අල්ලාගෙන සිටින්න සක්රිය / අක්රිය තත්පර කිහිපයක් සඳහා බොත්තම.

6.3 සාවද්‍ය කියවීම්

• Ensure the measurement surface is clean and free of debris.
• Perform a zero calibration on a known level surface.
• Avoid strong magnetic fields that could interfere with the device's sensors.

7. පිරිවිතර

8. වගකීම් සහ සහාය

8.1 වගකීම් තොරතුරු

The ALLmeter Digital Angle Finder (Model ALL066) comes with an 18-month manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.

8.2 පාරිභෝගික සහාය

For technical assistance, warranty claims, or any questions regarding your ALLmeter Digital Angle Finder, please contact ALLmeter customer support through the retailer's platform or the official ALLmeter website. Please have your purchase receipt and product model number (ALL066) available when contacting support.