iHome Rechargeable Auto Sensing LED Light Bars (4-Pack)

1. හැඳින්වීම

Thank you for choosing the iHome Rechargeable Auto Sensing LED Light Bars. This manual provides essential information for the safe and efficient use of your new lighting solution. These versatile LED light bars are designed to provide convenient, motion-activated illumination for various indoor spaces such as cabinets, closets, hallways, and more. Featuring a rechargeable battery, dimmable brightness, and easy installation, these lights enhance visibility and energy efficiency in your home.

2 ආරක්ෂිත තොරතුරු

මෙම නිෂ්පාදනය භාවිතා කිරීමට පෙර කරුණාකර සියලුම ආරක්ෂක උපදෙස් කියවන්න. මෙම උපදෙස් අනුගමනය කිරීමට අපොහොසත් වීමෙන් විදුලි කම්පනය, ගින්න හෝ වෙනත් අනතුරු සිදුවිය හැක.

• Do not expose the light bars to water or excessive moisture. This product is designed for indoor use only.
• Do not attempt to disassemble, repair, or modify the light bars. Refer all servicing to qualified personnel.
• තාප ප්‍රභවයන්ගෙන්, සෘජු හිරු එළියෙන් සහ දැවෙන ද්‍රව්‍යවලින් ඈත් වී සිටින්න.
• ඇලවුම් ලෝහ තහඩු යෙදීමට පෙර ස්ථාපන මතුපිට පිරිසිදු හා වියලි බවට වග බලා ගන්න.
• නැවත ආරෝපණය කිරීම සඳහා සපයා ඇති USB ආරෝපණ කේබල් පමණක් භාවිතා කරන්න.
• Do not stare directly into the LED light source, as it may cause eye strain.

3. පැකේජ අන්තර්ගතය

ඔබගේ පැකේජයේ සියලුම අයිතම ඇති බව තහවුරු කරගන්න:

• 4 x iHome Rechargeable Auto Sensing LED Light Bars
• 4 x USB ආරෝපණ කේබල්
• 8 x Metal Plates with Adhesive (2 per light bar for secure mounting)

4. නිෂ්පාදන ලක්ෂණ

• දීප්තිය: 50 lumens, with three adjustable brightness modes (20%, 50%, 100%).
• වර්ණ උෂ්ණත්වය: Offers Warm White, Natural White, and Cool White light options (approximately 3000K, 4500K, 6000K).
• චලන සංවේදකය: Detects movement up to 19.6 feet (6 meters) within a 120° angle.
• ස්වයංක්‍රීය ප්‍රකාරය: Automatically turns on in dark conditions when motion is detected and turns off after 20 seconds of no motion.
• සැමවිටම ක්‍රියාත්මක ප්‍රකාරය: අඛණ්ඩ ආලෝකකරණයක් සපයයි.
• පහසු ස්ථාපනය: Built-in magnets for direct attachment to metallic surfaces, or use included adhesive metal plates for non-metallic surfaces.
• නැවත ආරෝපණය කළ හැකි බැටරි: High-capacity battery with USB-C charging for eco-friendly operation.

5. පිහිටුවීම සහ ස්ථාපනය

The iHome LED Light Bars offer flexible installation options.

5.1 මූලික ගාස්තුව

Before first use, fully charge each light bar. Refer to Section 7 for charging instructions.

5.2 සවි කිරීමේ විකල්ප

Option 1: Magnetic Attachment (for metallic surfaces)

• Simply place the light bar directly onto any metallic surface. The built-in magnets will hold it in place.

Option 2: Adhesive Metal Plates (for non-metallic surfaces)

1. ස්ථාපනය සඳහා පිරිසිදු, වියලි සහ සුමට මතුපිටක් තෝරන්න.
2. Peel off the protective film from one side of the adhesive metal plate.
3. Stick the metal plate firmly onto the desired surface. Apply pressure for 30 seconds to ensure strong adhesion.
4. Attach the light bar to the metal plate. The light bar's magnets will securely connect to the plate.
5. Repeat for additional light bars as needed.

Image: Illustration of installing the light bars using built-in magnets on a refrigerator and adhesive metal plates under a cabinet.

රූපය: උදාample of iHome LED Light Bars providing illumination inside kitchen cabinets.

6. මෙහෙයුම් උපදෙස්

Each light bar features a multi-function button to control its settings.

6.1 මාදිලිය තේරීම

Press the multi-function button to cycle through the following modes:

• අක්‍රියයි: ආලෝකය නිවා දමයි.
• ස්වයංක්‍රීය මාදිලිය: The light will only activate in dark conditions when motion is detected. It will turn off automatically after 20 seconds of no motion.
• ALWAYS-ON Mode: The light remains continuously on until manually turned off or the battery is depleted.

Image: Diagram illustrating the motion sensor range (9.84ft-16.40ft, 120 degrees) and 20-second auto shut-off feature.

6.2 දීප්තිය ගැලපීම

While the light is on (in either AUTO or ALWAYS-ON mode), press and hold the multi-function button to cycle through the three brightness levels: 20%, 50%, and 100%. Release the button when the desired brightness is reached.

6.3 Color Temperature Selection

To change the light's color temperature, quickly double-press the multi-function button. The light will cycle between Warm White, Natural White, and Cool White. Select the color temperature that best suits your environment.

Image: Visual representation of the three available color temperature settings: Warm White, Natural White, and Cool White.

7. උපාංගය ආරෝපණය කිරීම

Each iHome LED Light Bar is equipped with a rechargeable battery.

1. When the battery is low, the light output may diminish, or the light may not turn on.
2. Gently detach the light bar from its magnetic mounting location.
3. Connect one end of the provided USB charging cable to the charging port on the light bar.
4. USB කේබලයේ අනෙක් කෙළවර සම්මත USB බල ඇඩැප්ටරයකට (ඇතුළත් කර නැත) හෝ පරිගණක USB පෝට් එකකට සම්බන්ධ කරන්න.
5. The charging indicator light will illuminate (typically red) during charging.
6. Once fully charged (approximately 1 hour for rapid recharge), the indicator light will change color (typically green or turn off).
7. A full charge provides approximately 6 hours of continuous use in Always-On mode or up to 250 uses in Auto mode.
8. After charging, disconnect the cable and reattach the light bar to its mounting location.

Image: Close-up of the light bar showing the USB-C charging port and cable connection, highlighting its rechargeable nature.

8. නඩත්තුව සහ රැකවරණය

To ensure the longevity and optimal performance of your iHome LED Light Bars, follow these care guidelines:

• පිරිසිදු කිරීම: Wipe the light bars with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse in water.
• බැටරි සත්කාර: For best battery life, avoid fully discharging the lights frequently. Recharge them when the light output noticeably dims. If storing for an extended period, charge the lights every 3-6 months.
• ගබඩා: Store the light bars in a cool, dry place away from direct sunlight and extreme temperatures.
• Adhesive Plates: If the adhesive on the metal plates loses its stickiness, replace them with new double-sided adhesive tape.

9. දෝශ නිරාකරණය

If you encounter issues with your iHome LED Light Bars, refer to the following common problems and solutions:

10. පිරිවිතර

11. වගකීම් සහ සහාය

iHome products are designed with quality and reliability in mind. This product is covered by a limited warranty against defects in materials and workmanship. For specific warranty details, please refer to the warranty card included with your purchase or visit the official iHome webඅඩවිය.

If you require technical support, have questions about your product, or need assistance with troubleshooting, please contact iHome customer service through their official website or the contact information provided in your product packaging. Please have your model number (2IHLT10) and proof of purchase ready when contacting support.