නිෂ්පාදනය අවසන්view
The ALLmeter DTI Digital Dial Indicator is a precision measuring tool designed for accurate dimensional measurements in various mechanical and industrial applications. It features a large LCD display for easy readability, switchable metric and imperial units, and a zero-setting function for versatile use.
රූපය 1: ඉදිරිපස view of the ALLmeter DTI Digital Dial Indicator, showing the LCD display and control buttons.
Figure 2: Detailed diagram illustrating the key components and dimensions of the digital dial indicator, including the LCD display, on/off switch, inch/mm switch, zero-setting button, holding point for clamp, spring-loaded probe, and screw thread type M2.5.
ඇතුළත් කර ඇති දේ
පැකේජය විවෘත කිරීමෙන් පසු, සියලුම සංරචක තිබේදැයි පරීක්ෂා කරන්න:
- Digital Dial Indicator unit
- Rear Cover (for mounting)
- 1.5V Battery (LR44 type)
- උපදෙස් අත්පොත (මෙම ලේඛනය)
Figure 3: Image showing the complete contents of the product package, including the digital dial indicator, rear cover, battery, and instruction manual.
සැලසුම
1. බැටරි ස්ථාපනය
The digital dial indicator requires one LR44 1.5V button cell battery. The battery compartment is located on the side of the unit.
- බැටරි මැදිරි කවරය සොයා ගන්න.
- මැදිරිය විවෘත කිරීම සඳහා කවරය මෘදු ලෙස ලිස්සා යන්න හෝ ගලවන්න.
- Insert the LR44 battery with the positive (+) side facing upwards.
- බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.
රූපය 4: සමීප රූපය view of the digital dial indicator, highlighting the convenient LR44 battery compartment for easy replacement and the zero button.
2. Attaching Rear Cover
The digital dial indicator comes with a detachable rear cover, allowing it to be used with different magnetic base holder stands or other mounting solutions. The standard rear cover can be replaced with the included metal back with a mounting lug for increased versatility.
- If a different rear cover is desired, use a small screwdriver to remove the screws securing the current rear cover.
- Carefully remove the existing cover.
- Align the desired rear cover (e.g., the metal one with mounting lug) with the screw holes.
- Secure the new cover by tightening the screws.
Video 1: Demonstration of how to detach and attach the rear cover of the digital dial indicator, showcasing its adaptability for various magnetic base holder stands.
මෙහෙයුම් උපදෙස්
1. බලය සක්රිය / අක්රිය කරන්න
ඔබන්න අක්රිය / සක්රිය උපාංගය සක්රිය හෝ අක්රිය කිරීමට බොත්තම.
2. Unit Conversion (mm/inch)
ඔබන්න අඟල්/මි.මී button to switch between metric (millimeters) and imperial (inches) units. The selected unit will be displayed on the LCD screen.
Figure 5: Comparison of the digital dial indicator display showing measurements in both millimeters (mm) and inches (in), demonstrating the unit conversion feature.
3. Zero Setting
To set the current position as zero, press the ZERO button. This allows for relative measurements from any desired reference point.
4. මිනුම් ගැනීම
Extend or retract the spring-loaded probe to make contact with the surface to be measured. The measurement will be displayed instantly on the LCD screen.
Video 2: Operational demonstration of the electronic digital dial indicator, including switching between mm/inch units, performing zero setting, and taking measurements on a surface.
5. ස්වයංක්රීය වසා දැමීම
The device features an automatic shutdown function to conserve battery life. If there is no operation for approximately 5 minutes, the indicator will automatically turn off.
Figure 6: Illustration of the automatic shutdown feature, indicating that the device powers off after 5 minutes of inactivity to save battery.
නඩත්තු කිරීම
1 පිරිසිදු කිරීම
To ensure accurate readings and prolong the life of your digital dial indicator, keep it clean. Wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the display or housing.
2. ගබඩා කිරීම
When not in use, store the digital dial indicator in its protective case to prevent dust and damage. Store in a dry environment away from direct sunlight and extreme temperatures.
Figure 7: The digital dial indicator shown with its protective storage case and included batteries, emphasizing proper storage for protection and longevity.
3. බැටරි ප්රතිස්ථාපනය
If the display starts flashing consistently, it indicates a low battery. Replace the LR44 battery as described in the "Battery Installation" section to ensure continued accurate operation.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| සංදර්ශකය හිස් හෝ අඳුරු ය. | බැටරිය ක්රියා විරහිත වී හෝ වැරදි ලෙස ස්ථාපනය කර ඇත. | Check battery orientation. Replace battery if necessary. |
| Display is flashing. | අඩු බැටරි දර්ශකය. | LR44 බැටරිය ප්රතිස්ථාපනය කරන්න. |
| වැරදි කියවීම්. | Dirt or debris on the probe or measuring surface; damaged probe; unit not properly zeroed. | Clean the probe and measuring surface. Re-zero the device. If problem persists, contact support. |
| ඒකකය සක්රිය නොවේ. | Battery issue; internal malfunction. | Ensure battery is new and correctly installed. If still unresponsive, contact support. |
පිරිවිතර
රූපය 8: අවසන්view of the digital dial indicator's key specifications, including measuring range, resolution, and operating conditions.
- මිනුම් පරාසය: 0-25.4mm (අඟල් 0-1)
- විභේදනය: 0.01mm (අඟල් 0.0005)
- ප්රතිචාර කාලය: ≤ 0.5 m/s
- මෙහෙයුම් උෂ්ණත්වය: 0 ~ 40 ° C (32 ~ 104 ° F)
- ගබඩා උෂ්ණත්වය: -20 ~ 70 ° C (-4 ~ 158 ° F)
- සාපේක්ෂ ආර්ද්රතාවය: ≤ 80% R.H
- ද්රව්ය: Aluminum Alloy frame
- නිෂ්පාදන මානයන්: අඟල් 7.09 x 3.35 x 2.36
- බර: ආසන්න වශයෙන් ග්රෑම් 129 (අවුන්ස 4.55)
- බැටරි වර්ගය: 1 x LR44 1.5V button cell (included)
- ස්වයංක්රීය වසා දැමීම: අක්රිය වීමෙන් විනාඩි 5 කට පසුව
වගකීම් සහ සහාය
ALLmeter products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact ALLmeter customer service through the retailer where the product was purchased or visit the official ALLmeter webඅඩවිය.
වැඩිදුර තොරතුරු සහ නිෂ්පාදන යාවත්කාලීන සඳහා, පිවිසෙන්න ALLmeter Store on Amazon.
