AM ARROWMAX Smart Mini Electric Engraving Pen & Carving Bits User Manual

1. හැඳින්වීම

This manual provides essential instructions for the safe and effective use of your AM ARROWMAX Smart Mini Electric Engraving Pen and its accompanying carving bits. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. නිෂ්පාදන අවසන්view

2.1 පැකේජයේ අන්තර්ගතය

• AM ARROWMAX Smart Mini Electric Engraving Pen (SGS PRO)
• චුම්බක ආරෝපණ කේබලය
• 30 Engraving Bits
• 12 Polishing Bits
• ගබඩා නඩුව
• පරිශීලක අත්පොත

This image displays the complete AM ARROWMAX Smart Mini Electric Engraving Pen kit, including the pen, its protective case, a USB charging cable, a variety of engraving and polishing bits, and an illustration of its smart app connectivity.

2.2 ප්රධාන සංරචක

මෙම රූපය සවිස්තරාත්මකව සපයයි view of the SGS MAX engraving pen, labeling its key components: the Magnetic Charging Port for easy charging, the Status Display showing battery, mode, and rotation direction, the Power Button for control, the durable Aluminium Alloy Body, and the Chuck for bit changes.

• චුම්බක ආරෝපණ වරාය: For convenient and secure charging of the device.
• තත්ව සංදර්ශකය: Shows battery level, selected speed mode, and rotation direction.
• බල බොත්තම: Controls power on/off and mode selection.
• ඇලුමිනියම් මිශ්‍ර ලෝහ ශරීරය: කල්පැවැත්ම සහ සුවපහසු ග්‍රහණයක් සපයයි.
• චක්: Securely holds engraving and polishing bits.

2.3 Engraving and Polishing Bits

The kit includes a comprehensive set of 30 engraving bits and 12 polishing bits, designed for various materials and applications. These bits feature a 2.35mm shank for compatibility.

This image showcases the comprehensive set of 30 engraving bits and 12 polishing bits that come with the ARROWMAX engraving pen, designed for various crafting tasks.

This detailed diagram categorizes and names various engraving bit types, including sharp needle, torch, oval, spherical, bullet, round tipped needle, ladder, round headed cylinder, flat headed cylinder, and inverted ladder types, providing clarity on their specific uses.

This image focuses on the construction of an engraving bit, emphasizing its Diamond Steel material for long life and precise cuts, and its 2.35mm shank with surface blasting for compatibility with most rotary tools.

3. පිහිටුවීම

3.1 උපාංගය ආරෝපණය කිරීම

1. Connect the magnetic charging cable to the charging port on the engraving pen.
2. Connect the other end of the USB cable to a compatible 5V USB power adapter (not included).
3. The status display will indicate the charging progress. Ensure the device is fully charged before first use.

3.2 Attaching/Changing Bits

1. Ensure the engraving pen is powered off.
2. Gently insert the desired engraving or polishing bit into the chuck until it is seated firmly.
3. To remove a bit, pull it straight out from the chuck. No additional tools are required.

4. මෙහෙයුම් උපදෙස්

4.1 බලය සක්රිය / අක්රිය

Press and hold the Power Button for a few seconds to turn the device on or off.

4.2 Adjusting Speed Modes

The engraving pen features 5 RPM modes for precise control:

This diagram illustrates the five adjustable speed modes of the engraving pen: 'A' for Auto Sensing (10000-30000 RPM), '1' for Low (15000 RPM), '2' for Medium (20000 RPM), '3' for High (25000 RPM), and '4' for Maximum (30000 RPM).

• Mode A (Auto Sensing): Automatically adjusts speed between 10,000-30,000 RPM based on your twist angle.
• Mode 1 (Low): 15,000 RPM
• Mode 2 (Medium): 20,000 RPM
• Mode 3 (High): 25,000 RPM
• Mode 4 (Maximum): 30,000 RPM

To change the speed mode, short press the Power Button while the device is on. The status display will show the current mode.

4.3 භ්‍රමණ දිශාව වෙනස් කිරීම

The device supports both forward and reverse rotation. To toggle the direction, press the dedicated direction button (if available, otherwise refer to the specific model's controls) or follow the instructions on the status display. This allows for greater flexibility in engraving and polishing tasks.

4.4 Engraving and Polishing Tips

• Always wear appropriate eye protection during operation.
• Select the correct bit for your material and desired effect.
• Start with a lower speed setting and gradually increase as needed.
• Apply light, consistent pressure. Excessive force can damage the bit or the workpiece.
• Practice on scrap material before working on your final project.
• Ensure your workpiece is securely held to prevent movement during operation.

5. නඩත්තු කිරීම

5.1 උපාංගය පිරිසිදු කිරීම

• Ensure the device is powered off and disconnected from the charger before cleaning.
• Wipe the body of the engraving pen with a soft, dry cloth.
• Use a small brush or compressed air to remove dust and debris from the chuck area.
• සැර රසායනික ද්‍රව්‍ය හෝ උල්ෙල්ඛ පිරිසිදුකාරක භාවිතා නොකරන්න.

5.2 Bit Care

• Clean bits after each use to remove material residue.
• Store bits in their designated case to prevent damage and loss.
• Replace worn or damaged bits to maintain optimal performance and safety.

5.3 බැටරි සත්කාර

• බැටරිය නිතර නිතර සම්පූර්ණයෙන්ම විසර්ජනය කිරීමෙන් වළකින්න.
• උපාංගය භාවිතා නොකරන විට සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
• දිගු කාලයක් ගබඩා කරන්නේ නම්, සෑම මාස කිහිපයකට වරක් බැටරිය ආසන්න වශයෙන් 50% දක්වා ආරෝපණය කරන්න.

6. දෝශ නිරාකරණය

6.1 උපාංගය ක්‍රියාත්මක නොවේ

• Ensure the battery is charged. Connect the device to the charger and check the status display.
• Press and hold the Power Button firmly for a few seconds.

6.2 Bit Not Holding Securely

• Ensure the bit is fully inserted into the chuck.
• Check if the bit shank is damaged or bent. Use only bits with a 2.35mm shank.

6.3 Poor Engraving/Polishing Performance

• Verify that the correct speed mode is selected for the material.
• Check if the bit is worn or dull. Replace if necessary.
• Ensure you are applying appropriate pressure; too much or too little can affect results.

7. පිරිවිතර

8 ආරක්ෂිත තොරතුරු

Always adhere to the following safety guidelines when using the engraving pen:

• අක්ෂි ආරක්ෂාව: පියාඹන සුන්බුන් වලින් ඔබේ ඇස් ආරක්ෂා කර ගැනීම සඳහා සෑම විටම ආරක්ෂිත කණ්නාඩි හෝ ඇස් කණ්ණාඩි පළඳින්න.
• වැඩ කරන ප්රදේශය: Ensure your work area is well-lit and well-ventilated. Keep it clean and free of clutter.
• ආරක්ෂිත වැඩ කොටස: Always secure the material you are working on to prevent it from moving unexpectedly.
• Proper Bits: Use only bits designed for the specific task and material.
• ජලයෙන් වළකින්න: Do not operate the device near water or in damp කොන්දේසි.
• ළමුන් සහ සුරතල් සතුන්: උපාංගය සහ සියලුම උපාංග ළමයින්ට සහ සුරතල් සතුන්ට ළඟාවිය නොහැකි ලෙස තබා ගන්න.
• Unplug Before Changing: Always ensure the device is powered off and disconnected from the charger before changing bits or performing maintenance.
• අධික උනුසුම් වීමෙන් වළකින්න: If the device feels excessively hot, stop use and allow it to cool down.

9. වගකීම් සහ සහාය

For warranty information, technical support, or service inquiries, please refer to the product packaging or contact ARROWMAX customer service directly. Keep your purchase receipt as proof of purchase.