1. හැඳින්වීම
The WUBEN PL01 is a compact, high-performance pen light designed for various applications including home use, outdoor activities, emergencies, and inspections. It features a bright 650-lumen output, dual power options (rechargeable battery or AAA batteries), IP68 waterproof rating, and a durable aluminum alloy construction. This manual provides detailed instructions for its safe and effective use.
Image 1.1: The WUBEN PL01 Pen Light, showcasing එහි සිනිඳු නිර්මාණය සහ සංයුක්ත ප්රමාණය.
2. පෙට්ටියේ ඇති දේ
Please verify that all items are present upon opening the package:
- WUBEN PL01 Pen Light x 1
- Rechargeable Battery (pre-installed or separate) x 1
- Type-C Charging Cable x 1
- ලේන්යාඩ් x 1
- Spare O-rings x 2
- පරිශීලක අත්පොත (මෙම ලේඛනය) x 1
Image 2.1: Contents of the WUBEN PL01 package, including the pen light, charging cable, lanyard, and spare O-rings.
3. පිහිටුවීම
3.1 බැටරි ස්ථාපනය
The WUBEN PL01 supports two power sources: the included rechargeable battery or two standard AAA batteries (not included). Ensure correct polarity during installation.
- ෆ්ලෑෂ් ලයිට් වල වලිගය ගලවන්න.
- Insert the rechargeable battery or two AAA batteries with the positive (+) end facing towards the head of the flashlight.
- Securely re-screw the tail cap until it is fully tightened.
Image 3.1: Illustration of the dual power options for the WUBEN PL01, showing both the rechargeable battery and AAA battery configuration.
3.2 නැවත ආරෝපණය කළ හැකි බැටරිය ආරෝපණය කිරීම
The included rechargeable battery features a built-in USB-C charging port. The flashlight itself does not have an integrated charging port.
- Unscrew the tail cap and remove the rechargeable battery from the flashlight.
- Connect the provided USB-C charging cable directly to the charging port on the battery.
- USB-C කේබලයේ අනෙක් කෙළවර අනුකූල USB බල ප්රභවයකට සම්බන්ධ කරන්න (උදා: බිත්ති ඇඩැප්ටරය, පරිගණක USB පෝට් එක).
- A red indicator light on the battery signifies that it is charging.
- බැටරිය සම්පූර්ණයෙන්ම ආරෝපණය වූ විට දර්ශක ආලෝකය කොළ පැහැයට හැරේ.
- ආරෝපණය කිරීමට සාමාන්යයෙන් පැය 1.5ක් පමණ ගතවේ.
- Once charged, reinsert the battery into the flashlight and secure the tail cap.
4. මෙහෙයුම් උපදෙස්
4.1 බලය සක්රිය / අක්රිය
To turn the WUBEN PL01 on or off, perform a full press of the tail switch button.
4.2 මාදිලිය මාරු කිරීම
With the light turned on, half-press the tail switch button to cycle through the available brightness modes in the following sequence:
- සඳ: 1 Lumen
- අඩු: 50 Lumens
- මධ්යම: 150 Lumens
- ඉහළ: 650 Lumens
The flashlight features a mode memory function, meaning it will activate in the last used brightness mode when turned on again.
Image 4.1: Diagram illustrating the tail switch operation for power on/off and mode cycling.
රූපය 4.2: උදාamples of the WUBEN PL01's four brightness modes in various practical scenarios, from facial examination to night walking.
4.3 Dual-Direction Clip Usage
The WUBEN PL01 is equipped with a versatile two-way clip, allowing for secure attachment to various items for hands-free lighting.
- Pocket Carry: Attach the clip to a shirt pocket or pants pocket for easy access.
- බැක්පැක් පටිය: Secure the flashlight to a backpack strap for illumination during hikes or walks.
- Cap Mount: Clip the flashlight to the brim of a cap to convert it into a temporary headlamp.
Image 4.3: Demonstrates the versatility of the dual-direction clip, showing the flashlight attached to a pocket, backpack strap, and cap.
5. නඩත්තු කිරීම
5.1 පිරිසිදු කිරීම
ප්රශස්ත කාර්ය සාධනය සහ පෙනුම පවත්වා ගැනීම සඳහා:
- ෆ්ලෑෂ් ලයිට් ශරීරය මෘදු, d ලයිට් එකකින් පිරිසිදු කරන්න.amp රෙදි. සැර රසායනික ද්රව්ය හෝ උල්ෙල්ඛ ද්රව්ය වලින් වළකින්න.
- For the lens, use a clean, soft cloth specifically designed for optical surfaces.
5.2 O-ring Replacement
The PL01's IP68 waterproof rating relies on properly sealed O-rings. Periodically inspect them for any signs of wear, cracks, or damage.
- If O-rings appear damaged, replace them with the provided spare O-rings.
- Apply a thin layer of silicone grease to the O-rings to ensure a better seal and prevent drying.
5.3 බැටරි සත්කාර
- If the flashlight will not be used for an extended period, remove the batteries to prevent potential leakage and damage.
- For the rechargeable battery, recharge it every 3-6 months to maintain its overall lifespan and capacity.
Image 5.1: The WUBEN PL01's Type III hard-anodized aluminum body, highlighting its scratch, rust, and impact resistance.
Image 5.2: The WUBEN PL01 demonstrating its IP68 waterproof and 2-meter impact resistance, suitable for demanding environments.
6. දෝශ නිරාකරණය
If you encounter issues with your WUBEN PL01, please refer to the following common problems and solutions:
- ආලෝකය ක්රියාත්මක නොවේ:
- Ensure the batteries are installed with correct polarity.
- Check if the rechargeable battery is charged, or if AAA batteries are new.
- Verify that the tail cap is fully tightened. A loose tail cap can prevent electrical contact.
- Clean the battery contacts and the contact points inside the flashlight with a clean cloth.
- අනපේක්ෂිත ලෙස ආලෝකය දැල්වීම හෝ අඳුරු වීම:
- The battery level may be low. Recharge the included battery or replace AAA batteries.
- වලිග තොප්පිය ආරක්ෂිතව තද කර ඇති බවට වග බලා ගන්න.
- Clean battery contacts and internal contact points.
- Water ingress (if exposed to water):
- Immediately turn off the flashlight and remove the batteries.
- Inspect the O-rings for any damage, tears, or improper seating. Replace if necessary.
- Ensure the tail cap was fully tightened before exposure to water.
- Allow the flashlight to dry completely before reassembling and attempting to use it.
If the problem persists after attempting these solutions, please contact WUBEN customer support.
7. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආකෘතිය | PL01 |
| ප්රතිදාන මාදිලි | High (650 Lumens), Medium (150 Lumens), Low (50 Lumens), Moon (1 Lumen) |
| ධාවන කාලය | High: 1 hour, Medium: 2.5 hours, Low: 7 hours, Moon: 125 hours |
| බැටරි වර්ගය | Rechargeable (Included) / 2 x AAA Battery (Not Included) |
| කදම්භ දුර | මීටර් 110 |
| උපරිම කදම්භ තීව්රතාව | 3000 සීඩී |
| LED | 1 x 315D |
| ජල ආරක්ෂිත ශ්රේණිගත කිරීම | IP68 (Submersible in 2m water for 1 hour) |
| බලපෑම් ප්රතිරෝධය | මීටර් 2 |
| බර | 1.59 oz (බැටරි සමඟ) |
| මානයන් (L x D) | අඟල් 5.31 x අඟල් 0.59 |
| ද්රව්ය | ඇනෝඩීකරණය කළ ඇලුමිනියම් |
| වර්ණ උෂ්ණත්වය | 5000 කෙල්වින් |
Image 7.1: Diagram illustrating the internal components of the WUBEN PL01, focusing on the 315D LED emitter and optical system.
8. වගකීම් තොරතුරු
WUBEN products typically come with a manufacturer's warranty. For specific warranty terms, conditions, and registration details, please refer to the official WUBEN website or contact their customer support. Keep your purchase receipt as proof of purchase for any warranty claims.
9. පාරිභෝගික සහාය
For further assistance, product inquiries, or technical support, please visit the official WUBEN website or contact their customer service department. You can often find FAQs, troubleshooting guides, and contact information on their webඅඩවිය.
Official WUBEN Store: WUBEN Store on Amazon
