Morimoto LF2-531Y

Morimoto XB Evo Hybrid LED Headlights User Manual

Model: XB Evo Hybrid (LF2-531Y) | Brand: Morimoto | Application: Toyota 4Runner (2014-2024)

1. හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of your Morimoto XB Evo Hybrid LED Headlights. These headlights are designed to enhance the lighting performance and aesthetic of your Toyota 4Runner (2014-2024) with advanced Bi-LED projectors, bright Daytime Running Lights (DRL), and amber LED turn signals. Please read this manual thoroughly before beginning installation or operation to ensure proper function and safety.

White Toyota 4Runner with Morimoto XB Evo Hybrid LED Headlights driving on a dirt road, kicking up dust.

Image 1.1: Toyota 4Runner equipped with Morimoto XB Evo Hybrid LED Headlights.

2 ආරක්ෂිත තොරතුරු

Always prioritize safety during installation and operation. Failure to follow these guidelines may result in injury, damage to the product, or vehicle damage.

  • Disconnect the vehicle's battery before beginning any electrical work to prevent electrical shock or short circuits.
  • ආරක්ෂිත කණ්නාඩි සහ අත්වැසුම් ඇතුළු සුදුසු පුද්ගලික ආරක්ෂක උපකරණ පළඳින්න.
  • වාහනය සමතලා මතුපිටක් මත නවතා ඇති අතර වාහන නැවැත්වීමේ තිරිංගය යොදන බවට වග බලා ගන්න.
  • Allow the vehicle's engine and any hot components to cool down before working.
  • ස්ථාපන ක්‍රියාවලියේ ඕනෑම පියවරක් පිළිබඳව ඔබට සැකයක් ඇත්නම්, සුදුසුකම් ලත් මෝටර් රථ කාර්මිකයෙකුගෙන් විමසන්න.
  • Do not modify the headlight assemblies or wiring harnesses, as this may void the warranty and compromise safety.

3. පැකේජ අන්තර්ගතය

Verify that all components are present and undamaged before proceeding with installation. The package should contain the following items:

  • Pair of Morimoto XB Evo Hybrid LED Headlight Assemblies (Left and Right)
  • Plug and Play Wiring Harnesses (specific to vehicle's original headlight type)
  • DRL පටි
  • DRL Harness Extension
  • ෆියුස් ටැප්
  • OE LED Harnesses (if applicable)
  • OE Halogen Harnesses (if applicable)
  • Resistors (if applicable)
  • 9005 Connector Caps (if applicable)
A pair of Morimoto XB Evo Hybrid LED Headlights shown with various wiring harnesses laid out below them.

Image 3.1: Morimoto XB Evo Hybrid LED Headlights and included wiring components.

සමීප රූපය view of individual wiring components: DRL harness, DRL harness extension, fuse tap, OE LED harnesses, OE Halogen harnesses, resistors, and 9005 connector caps.

රූපය 3.2: විස්තරාත්මක view of the various wiring harnesses and accessories.

4. පිහිටුවීම සහ ස්ථාපනය

4.1. අවශ්ය මෙවලම්

  • සොකට් රෙන්ච් සෙට්
  • පැනල් ඉවත් කිරීමේ මෙවලම්
  • ඉස්කුරුප්පු නියන (පිලිප්ස් සහ පැතලි හිස)
  • Wire Strippers/Crimpers (if custom wiring is needed, though typically plug-and-play)
  • බහුමාපකය (සම්බන්ධතා පරීක්ෂා කිරීම සඳහා)
  • Zip Ties or Cable Management Clips

4.2. පූර්ව ස්ථාපන පියවර

  1. Park the vehicle on a flat, stable surface and engage the parking brake.
  2. එන්ජිම නිවා දමා ජ්වලනයෙන් යතුර ඉවත් කරන්න.
  3. වාහනයේ බැටරියේ ඍණ අග්‍රය විසන්ධි කරන්න.
  4. Allow the engine bay to cool down completely.

4.3. හෙඩ් ලයිට් ඉවත් කිරීම

  1. Carefully remove any plastic clips, bolts, or screws securing the front bumper cover.
  2. Gently pull the bumper cover away from the vehicle to access the headlight mounting bolts. It may not be necessary to fully remove the bumper, only to loosen it sufficiently.
  3. Locate and remove the bolts securing the factory headlight assembly. Typically, there are bolts on the top, side, and sometimes underneath the headlight.
  4. Carefully pull the factory headlight assembly forward, disconnecting all electrical connectors from the rear of the housing.
  5. අනෙක් පැත්ත සඳහා ක්රියා පටිපාටිය නැවත කරන්න.

4.4. රැහැන් සම්බන්ධතා

The Morimoto XB Evo Hybrid headlights feature a plug-and-play design. The specific harnesses used will depend on whether your 4Runner originally came with LED or Halogen headlights.

  1. Identify Original Headlight Type: Determine if your vehicle originally had LED or Halogen headlights. Select the corresponding Morimoto wiring harness (OE LED Harnesses or OE Halogen Harnesses).
  2. Connect Main Headlight Harness: Connect the appropriate Morimoto main headlight harness to the vehicle's factory headlight connector.
  3. DRL Harness Connection: Connect the DRL Harness to the designated port on the new headlight assembly. Use the DRL Harness Extension if needed for proper routing.
  4. Fuse Tap Installation: Install the provided Fuse Tap into an appropriate fuse slot in the vehicle's fuse box (refer to your vehicle's owner's manual for an accessory fuse location). Connect the DRL harness to the fuse tap. This provides power for the Daytime Running Lights.
  5. Resistor Installation (if applicable): If your vehicle requires resistors to prevent hyper-flashing or bulb-out warnings (common with some halogen-to-LED conversions), securely mount the resistors to a metal surface away from plastic components, as they can generate heat. Connect them as per the included resistor instructions.
  6. 9005 Connector Caps (if applicable): Use these caps to seal any unused connectors.
  7. සියලුම සම්බන්ධතා ආරක්ෂිත සහ නිසි ලෙස වාඩි වී ඇති බවට සහතික වන්න.

4.5. හෙඩ් ලයිට් සවි කිරීම

  1. Carefully guide the new Morimoto XB Evo Hybrid LED Headlight assembly into the opening. Ensure all wiring is tucked away and not pinched.
  2. Align the mounting points and secure the headlight assembly with the factory bolts removed earlier. Do not overtighten.
  3. Repeat for the other headlight.
  4. Reinstall the front bumper cover, ensuring all clips, bolts, and screws are reattached securely.

4.6. ස්ථාපන පසු පරීක්‍ෂණ

  1. වාහනයේ බැටරියේ ඍණ අග්‍රය නැවත සම්බන්ධ කරන්න.
  2. Turn on the vehicle's ignition and test all lighting functions: Daytime Running Lights, Low Beams, High Beams, and Turn Signals.
  3. Verify that there are no dashboard warning lights related to the headlights.
  4. Perform a headlight aiming adjustment. This is crucial for proper light distribution and to avoid blinding oncoming traffic. Consult your vehicle's service manual or a professional for correct aiming procedures.

5. මෙහෙයුම් උපදෙස්

Your Morimoto XB Evo Hybrid LED Headlights are designed to integrate seamlessly with your vehicle's existing lighting controls.

5.1. Daytime Running Lights (DRL)

The integrated white LED DRLs will illuminate automatically when the vehicle is running and the headlights are off, or as per your vehicle's DRL settings. These provide enhanced visibility during daylight hours.

A pair of Morimoto XB Evo Hybrid LED Headlights with the bright white Daytime Running Lights (DRLs) illuminated.

Image 5.1: Headlights with DRLs active.

5.2. Low Beam

Activate the low beams using your vehicle's standard headlight switch. The Bi-LED projectors will provide a wide and bright light pattern for general night driving, compliant with DOT standards.

5.3. ඉහළ කදම්භය

Engage the high beams using your vehicle's standard high beam control. The Bi-LED projectors will switch to a more focused, intense beam pattern to illuminate further down the road.

5.4. හැරවුම් සංඥා

The amber LED turn signals will activate with a fade-off effect when your vehicle's turn signal lever is engaged. Ensure they flash at the correct rate.

A pair of Morimoto XB Evo Hybrid LED Headlights with the amber LED turn signals illuminated.

Image 5.2: Headlights with amber turn signals active.

6. නඩත්තු කිරීම

Proper maintenance ensures the longevity and optimal performance of your Morimoto XB Evo Hybrid LED Headlights.

6.1 පිරිසිදු කිරීම

  • Clean the headlight lenses regularly with a soft cloth and mild automotive soap or glass cleaner.
  • Avoid abrasive cleaners or harsh chemicals, as these can damage the polycarbonate lens material.
  • සබන් අවශේෂ ඉවත් කිරීම සඳහා ජලය සමග හොඳින් සේදීම.

6.2 පරීක්ෂා කිරීම

  • Periodically inspect the headlight assemblies for any signs of damage, cracks, or moisture intrusion.
  • Check all wiring connections to ensure they remain secure and free from corrosion.
  • Verify that all lighting functions (DRL, low beam, high beam, turn signals) are operating correctly.

7. දෝශ නිරාකරණය

This section addresses common issues you might encounter with your headlights.

කලාපයවිය හැකි හේතුවවිසඳුම
හෙඩ් ලයිට් පත්තු වෙන්නේ නැහැLoose wiring connection, blown fuse, incorrect harness selectionCheck all wiring connections, inspect vehicle fuses, ensure correct OE harness is used.
DRLs not workingFuse tap not installed correctly, DRL harness disconnected, blown fuseVerify fuse tap connection and fuse, check DRL harness connections.
Turn signals hyper-flashingResistors not installed or faulty, vehicle's flasher relay incompatibilityEnsure resistors are correctly installed and functioning. Consult a technician if issue persists.
Moisture inside headlightImproper seal, condensation (temporary)Small amounts of condensation are normal and should dissipate. If persistent or large water droplets, inspect seals and contact support.

8. පිරිවිතර

විශේෂාංගයවිස්තර
ආකෘතියXB Evo Hybrid (LF2-531Y)
යෙදුමToyota 4Runner (2014-2024)
ආලෝක ප්රභවයOE-grade Automotive LEDs (Japan)
ප්‍රොජෙක්ටර් වර්ගයBi-LED
DRL Colorසුදු LED
Turn Signal ColorAmber LED with Fade-off Effect
කාච ද්රව්යපොලිකාබනේට්
කාච වර්ණයපැහැදිලියි
විශේෂ ලක්ෂණDustproof, Waterproof
අනුකූල වීමDOT Compliant (USA)
අයිතමයේ බරරාත්තල් 19 (යුගල)
පැකේජ මානයන්අඟල් 32 x 26 x 11.5
UPC840203374948

9. වගකීම් සහ සහාය

Morimoto stands behind the quality of the XB Evo Hybrid LED Headlights with an industry-leading අවුරුදු පහක වගකීමක්. This warranty covers manufacturing defects and ensures the product performs as intended under normal use.

For warranty claims, technical assistance, or any questions regarding your Morimoto product, please contact Morimoto customer support through their official website or authorized dealers. When contacting support, please have your purchase information and product model number (LF2-531Y) available.

අදාළ ලියකියවිලි - LF2-531Y

පෙරview 2014-2024 Toyota 4Runner සඳහා Morimoto XB EVO හෙඩ්ලයිට් ස්ථාපන මාර්ගෝපදේශය
2014-2024 Toyota 4Runner මාදිලිවල Morimoto XB EVO LED හෙඩ් ලයිට් සඳහා සවිස්තරාත්මක ස්ථාපන මාර්ගෝපදේශය. සාර්ථක උත්ශ්‍රේණි කිරීමක් සඳහා පියවරෙන් පියවර උපදෙස්, මෙවලම් අවශ්‍යතා සහ රැහැන් විස්තර ඇතුළත් වේ.
පෙරview 2016+ Toyota Tacoma XB LED හෙඩ්ලයිට් ස්ථාපන මාර්ගෝපදේශය
2016 සහ නව ටොයොටා ටකෝමා මාදිලි සඳහා මොරිමොටෝ XB LED හෙඩ්ලයිට් සඳහා සවිස්තරාත්මක ස්ථාපන මාර්ගෝපදේශයකි. මෙම මාර්ගෝපදේශය පැකේජ අන්තර්ගතය විස්තර කරන අතර කර්මාන්තශාලා හෙඩ් ලයිට් ඉවත් කිරීම සහ රැහැන් ඇදීම සහ ඉලක්ක කිරීම ඇතුළුව නව LED ඒකක ස්ථාපනය කිරීම සඳහා පියවරෙන් පියවර උපදෙස් සපයයි.
පෙරview 2016-2021 හොන්ඩා සිවික් සඳහා මොරිමොටෝ XB හෙඩ්ලයිට් ස්ථාපන මාර්ගෝපදේශය
2016-2021 හොන්ඩා සිවික් සඳහා මොරිමොටෝ XB LED හෙඩ්ලයිට් (LF2-473) සඳහා සවිස්තරාත්මක ස්ථාපන මාර්ගෝපදේශය. විසුරුවා හැරීම, ස්ථාපනය කිරීම සහ ඉලක්ක කිරීමේ ක්‍රියා පටිපාටි ආවරණය කරයි.
පෙරview Morimoto X3B Third Brake Light Installation Guide for 2014-2021 Toyota Tundra
Step-by-step installation guide for the Morimoto X3B LED Third Brake Light on 2014-2021 Toyota Tundra models. Includes package contents, required tools, and instructions for the optional Rapid Flash Module.
පෙරview Ford Super Duty (2020-2022) සඳහා Morimoto XB Hybrid LED හෙඩ්ලයිට් LF556.2 ස්ථාපන මාර්ගෝපදේශය
Ford F-250, F-350, F-450 Super Duty ට්‍රක් රථ (2020-2022) සඳහා Morimoto XB Hybrid LED හෙඩ්ලයිට් (LF556.2) සඳහා පියවරෙන් පියවර ස්ථාපන මාර්ගෝපදේශය. කොටස්, මෙවලම් සහ දෝශ නිරාකරණය ඇතුළත් වේ.
පෙරview Morimoto X3B LED Third Brake Light Installation Guide for Toyota 4Runner (2010-2024)
Step-by-step installation guide for the Morimoto X3B LED Third Brake Light assembly on Toyota 4Runner models from 2010 to 2024. Includes what's included, required tools, and detailed removal and installation instructions.