අත්පොත්+

KGUSS DX5II

KGUSS TOPPING DX5II Fully Balanced DAC Headphone Amp ඒකාබද්ධ පරිශීලක අත්පොත

Model: DX5II | Brand: KGUSS

1. හැඳින්වීම

The KGUSS TOPPING DX5II is a high-performance fully balanced DAC and headphone amplifier combo designed for superior audio reproduction. This manual provides essential information for setting up, operating, and maintaining your device.

පෙට්ටියේ ඇති දේ

  • TOPPING DX5 II x 1
  • දුරස්ථ පාලකය x 1
  • USB කේබල් x 1
  • AC කේබල් x 1
  • 6.35mm සිට 3.5mm දක්වා ඇඩැප්ටරය x 1
  • බ්ලූටූත් ඇන්ටනාව x 1
  • නිෂ්පාදන තොරතුරු කාඩ්පත x 1
TOPPING DX5II unit with included accessories
Image: The TOPPING DX5II unit shown with its remote control, USB cable, AC cable, 6.35mm to 3.5mm adapter, Bluetooth antenna, and product information card.

2. නිෂ්පාදන අවසන්view සහ ප්රධාන ලක්ෂණ

The DX5II is a new generation fully balanced DAC and headphone amplifier combo, offering significant upgrades and advanced functionalities for an enhanced audio experience.

ප්රධාන ලක්ෂණ:

  • Dual ES9039Q2M DAC Chips: Each channel utilizes an independent ESS ES9039Q2M DAC chip for lower crosstalk, improved imaging, 133dB SNR, 133dB dynamic range, and distortion as low as 0.00006%.
  • X-Hybrid Headphone Ampලයිෆයර් පරිපථය: Features an original triple-stagඊ දෙමුහුන් amp circuit (discrete input, op-amp gain, discrete output) for high efficiency, improved thermals, and precise delivery. Power output peaks at 7600mW x2 into 16Ω.
  • Wide Headphone Compatibility: Equipped with 6.35mm single-ended, 4.4mm balanced, and 4-pin XLR headphone jacks, suitable for low-sensitivity headphones to high-sensitive IEMs with a low noise floor of 1.8uVrms.
  • 10-Band High-Precision PEQ: Desktop software allows tweaking 10 independent frequency bands (frequency, gain, Q-factor adjustment). Multiple profiles can be saved, and EQ can be applied independently to speakers and headphones.
  • LDAC Wireless Connectivity: Equipped with QCC5125 chip, supporting Bluetooth 5.1 and up to 96kHz/24bit. Fully supports LDAC, aptX-Adaptive, aptX HD, AAC, and SBC audio encodings for high-quality wireless audio.
Comparison table of TOPPING DX5 II and DX5 specifications
Image: A comparison table highlighting the improved specifications of the TOPPING DX5 II over its predecessor, the DX5, including DAC chip, amplifier architecture, SNR, dynamic range, headphone output power, PEQ, display, 12V Trigger, and UI.
Diagram showing dual ES9039Q2M DAC chips and X-Hybrid Headphone Ampලයිෆයර් පරිපථය
රූපය: විස්තරාත්මක view of the dual ES9039Q2M DAC chips and a schematic of the X-Hybrid Headphone Amplifier Circuit, emphasizing the advanced internal components and their contribution to audio performance.
TOPPING DX5II connected to various headphones via different output jacks
Image: The TOPPING DX5II unit with various headphones connected to its 6.35mm single-ended, 4.4mm balanced, and 4-pin XLR headphone output jacks, illustrating its broad compatibility.
Screenshot of the 10-band high-precision PEQ adjustment software
Image: A screenshot of the desktop software interface for the 10-band high-precision PEQ adjustment, showing customizable frequency bands, gain, and Q-factor settings.
TOPPING DX5II displaying Aurora UI with various visualizers and settings
Image: The TOPPING DX5II's 2.0-inch full-color screen displaying the Aurora UI, showcasing different visualizers like FFT, VU meter, and playback info, along with display settings options.

නිල නිෂ්පාදන වීඩියෝව: අවසන්view

වීඩියෝ: නිලධාරියෙක් අවසන්view of the TOPPING DX5II Fully Balanced DAC Headphone Amp Combo, highlighting its design, features, and connectivity options.

3. Connections and Setup

Proper connection of your DX5II is crucial for optimal performance. Follow these steps to set up your device.

ඉදිරිපස පුවරුව අවසන්view

  • 4-pin XLR Headphone Output Jack: For balanced headphone connections.
  • 6.35mm Headphone Output Jack: For single-ended headphone connections.
  • 4.4mm Balanced Headphone Output Jack: For balanced headphone connections.
  • තිරය: Displays current status, settings, and UI.
  • දුරස්ථ පාලක ලබන්නා: For infrared remote commands.
  • මෙනු බොත්තම: Accesses the setup menu.
  • ආදාන බොත්තම: Switches input channels.
  • මුල් පිටුව බොත්තම: Switches home page display modes.
  • Volume Knob & User-defined Button: Rotates to adjust volume; press for user-defined functions.

පසුපස පුවරුව උඩින්view

  • සමතුලිත XLR ප්‍රතිදානය: For balanced line output to ampලයිෆයර් හෝ ක්රියාකාරී කථිකයන්.
  • Single-ended RCA Output: For single-ended line output to ampලයිෆයර් හෝ ක්රියාකාරී කථිකයන්.
  • USB ආදානය: Connects to a computer or other USB audio source.
  • Optical SPDIF Input: Connects to optical audio sources.
  • Coaxial SPDIF Input: Connects to coaxial audio sources.
  • බ්ලූටූත් ආදානය: රැහැන් රහිත ශ්‍රව්‍ය ප්‍රවාහය සඳහා.
  • 12V Trigger IN/OUT (3.5mm jack): For synchronized power control with other devices.
  • Power Input (AC 100-277V 50/60Hz): AC බල සැපයුමට සම්බන්ධ වේ.
  • බල සැපයුම් සුවිචය: උපාංගය සක්රිය / අක්රිය කරයි.
Diagram of TOPPING DX5II front and rear panels with labeled ports
Image: A detailed diagram illustrating the front and rear panels of the TOPPING DX5II, with all input and output ports clearly labeled for easy identification and connection.

Connecting to Input Sources

The DX5II supports USB, Coaxial, Optical, and Bluetooth inputs. Connect your audio source to the corresponding input port on the rear panel.

හෙඩ්ෆෝන් සම්බන්ධ කිරීම

Three types of headphone jacks are available on the front panel: 6.35mm single-ended, 4.4mm balanced, and 4-pin XLR balanced. Connect your headphones to the appropriate jack.

වෙත සම්බන්ධ වෙමින් Ampලයිෆයර් හෝ ක්‍රියාකාරී කථිකයන්

Use XLR or RCA cables to connect the DX5II to your amplifiers or active speakers. Ensure to turn off all devices before making connections to avoid damage.

12V ප්‍රේරක සම්බන්ධතාවය

The 12V Trigger IN/OUT allows the DX5II to be activated by other devices or to activate other devices via a 3.5mm AUX cable. This enables synchronized power on/off with compatible equipment.

Official Product Video: User Manual Walkthrough

Video: A detailed walkthrough of the TOPPING DX5II user manual, covering various aspects of setup, connections, and initial operation.

4. මෙහෙයුම් උපදෙස්

Familiarize yourself with the operational controls and settings of your DX5II.

Power On & Off / Standby Operation

  • බල ගැන්වීම: Press the power switch on the rear panel.
  • සුදානමින් සිටීම: Short press the volume knob on the front panel or use the remote control to enter standby. Press again to exit.

පරිමාව සැකසීම

  • නිශ්ශබ්ද කරන්න/නිශ්ශබ්ද කරන්න: Press the mute button on the remote control.
  • පරිමාව සකස් කිරීම: Rotate the volume knob on the front panel or use the volume buttons on the remote control.

ආදාන සැකසුම්

The DX5II supports multiple input channels. You can choose between auto-detect or manual selection in the setup menu. Use the Input button on the front panel or remote to switch between active inputs.

ප්රතිදාන සැකසුම්

The device allows preselection of commonly used output channels. Options include All (Headphone Outputs), All (Line Outputs), HPA SE (6.35mm), HPA BAL (4.4mm/4-pin XLR), LO SE (RCA), and LO BAL (XLR).

PCM Filter Setting

The DX5II offers various PCM filter options (F-1 to F-8) to fine-tune the sound characteristics.

PEQ Configuration

The 10-band high-precision PEQ can be configured via desktop software. You can save up to 5 custom configurations and apply them offline.

Aurora UI Display

The 2.0-inch full-color screen offers various display modes (Normal, VU, FFT) and customizable background colors. The pressable knob supports customizable functions.

5. දෝශ නිරාකරණය

If you encounter any issues with your DX5II, refer to the following common problems and solutions:

  • ශබ්දයක් නැත: Check power supply, input selection, cable connections, and upstream devices.
  • H/M/L blinks, others are off (Firmware exception): Unplug and re-plug the power cable, then flash the firmware again.
  • HML and H/L blinks alternately (Input voltage is high/low): ඇතුළත් බල ඇඩැප්ටරය භාවිතා කරන්න.
  • HML and M blinks alternately (Positive and negative voltage anomalies): Check power supply, disconnect other devices, and reboot.
  • Blinks only the current gain LED (Headphone amplifier circuit outputs abnormal DC voltagඊ): Change the song or turn down the volume.

වැඩිදුර සහාය සඳහා, කරුණාකර පාරිභෝගික සහාය අමතන්න.

Official Product Video: Troubleshooting Guide

Video: A guide to common troubleshooting steps for the TOPPING DX5II, addressing various operational issues and their potential solutions.

6. පිරිවිතර

General Attributes

ගුණාංගයවටිනාකම
මනින ලද මානයන්19.0cm x 15.5cm x 4.4cm (including protruding parts)
බරග්රෑම් 945
බල ආදානය100-277VAC 50Hz/60Hz
සං al ා ආදානයUSB/BT/OPT/COAX
රේඛා ප්‍රතිදානයXLR/RCA
හෙඩ්ෆෝන් අවුට්පුට් ජැක්6.35mm headphone output jack, 4.4mm headphone output jack, 4-PIN-XLR headphone output jack
වෙනත් සම්බන්ධක12V Trigger In (3.5mm jack), 12V Trigger Out (3.5mm jack)
බ්ලූටූත් පරාසය>10M
ප්රදර්ශනය කරන්නඅඟල් 2 LCD
පාලනය කරන්න3 buttons + multifunction knob + Remote control
ස්ථාවර බලශක්ති පරිභෝජනය<1.3W
බලශක්ති පරිභෝජනය<6W

DX5 II DAC Parameters (LineOut/USB In@96kHz)

පරාමිතියRCAXLR
THD+N @1kHz (A-wt)<0.00008%<0.00006%
THD @20-20kHz 90kBw<0.0005%<0.00015%
SNR @1kHz (A-wt)128dB132dB
ගතික පරාසය @1kHz (A-wt)128dB132dB
සංඛ්යාත ප්රතිචාරය20Hz-20kHz (±0.3dB), 20Hz-40kHz (±1.0dB)20Hz-20kHz (±0.3dB), 20Hz-40kHz (±1.0dB)
ප්රතිදාන මට්ටම2.5Vrms @0dBFS5.0Vrms @0dBFS
ශබ්දය @A-wt<1.1uVrms<1.3uVrms
චැනල් Crosstalk-135dB @1kHz-147dB @1kHz
නාලිකා ශේෂය0.3 dB0.3 dB
ප්රතිදාන සම්බාධනය50Ω100Ω

සටහන: ඉහත දත්ත AC220V 50Hz තත්ත්‍වය යටතේ TOPPING රසායනාගාරයේ සිදු කරන ලද පරීක්ෂණයේ ප්‍රතිඵලයකි.

DX5 II හෙඩ්ෆෝන් Amplifier Specifications (USB In@96kHz)

පරාමිතිය6.35mm හෙඩ්ෆෝන් ජැක්4.4mm/4-pin XLR headphone jack
THD+N @1kHz (A-wt)<0.00008% @Output=20mW (32Ω), <0.00007% @Output=22mW (300Ω)<0.00007% @Output=85mW (32Ω), <0.00007% @Output=85mW (300Ω)
THD @20-20kHz (90kBw)<0.0005% @Output=20mW (32Ω), <0.0005% @Output=22mW (300Ω)<0.0005% @Output=85mW (32Ω), <0.0005% @Output=90mW (300Ω)
SNR @MAX OUT 1kHz (A-wt)131dB133dB
ගතික පරාසය @1kHz (A-wt)131dB133dB
සංඛ්යාත ප්රතිචාරය20Hz-20kHz (±0.3dB), 20Hz-40kHz (±1.0dB)20Hz-20kHz (±0.3dB), 20Hz-40kHz (±1.0dB)
ප්රතිදාන මට්ටම7.2Vpp @G=L, 24.2Vpp @G=H15.0Vpp @G=L, 48.6Vpp @G=H
ශබ්දය (A-wt)<2.5uVrms @G=H, <1.1uVrms @G=L<4.3uVrms @G=H, <1.8uVrms @G=L
චැනල් Crosstalk-127dB @1kHz-143dB @1kHz
ලබාගන්නG=L 8.6dB (Vrms/FS), G=H 18.7dB (Vrms/FS)G=L 14.6dB (Vrms/FS), G=H 24.7dB (Vrms/FS)
නාලිකා ශේෂය0.3 dB0.3 dB
ප්රතිදාන සම්බාධනය<0.1Ω<0.1Ω
ප්රතිදාන බලය3300mW x 2 @16Ω THD+N<1%, 2200mW x 2 @32Ω THD+N<1%, 1160mW x 2 @64Ω THD+N<1%, 250mW x 2 @300Ω THD+N<1%, 120mW x 2 @600Ω THD+N<1%7600mW x 2 @16Ω THD+N<1%, 6400mW x 2 @32Ω THD+N<1%, 4300mW x 2 @64Ω THD+N<1%, 990mW x 2 @300Ω THD+N<1%, 490mW x 2 @600Ω THD+N<1%
ලෝඩ් සම්බාධනය>8Ω>8Ω

සටහන: ඉහත දත්ත AC220V 50Hz තත්ත්‍වය යටතේ TOPPING රසායනාගාරයේ සිදු කරන ලද පරීක්ෂණයේ ප්‍රතිඵලයකි.

7. ආරක්ෂිත පූර්වාරක්ෂාවන්

  • ඒකකය උණුසුම්, තෙතමනය සහිත පරිසරයක තබා නොගන්න හෝ ඒකකයට තදින් පහර දෙන්න එපා.
  • නඩුව විවෘත කිරීමෙන් වගකීම් සහතිකය ක්ෂණිකව අවලංගු වේ!
  • ගෘහස්ථ භාවිතය පමණි.
  • DX5 II හි අසාර්ථකත්වය හේතුවෙන් සෘජුව හෝ වක්‍රව සිදුවන ඕනෑම අලාභයක් හෝ හානියක් සඳහා ටොපිං කිසිදු වගකීමක් භාර නොගනී.
  • වැඩිදියුණු කිරීමේ අරමුණු සඳහා, පූර්ව දැනුම්දීමකින් තොරව වෙනස්කම් වලට යටත්ව පිරිවිතර.

8. වගකීම් සහ සහාය

Hificollege aims for 100% customer satisfaction. We offer authoritative certification, ensuring 100% authenticity of all products sold. Our support team is ready to answer any questions 24/7. We provide more than 1 year of quality restoration, covering repair and shipping costs. We also offer a lowest price match within 30 days.

Documents - KGUSS – DX5II

අදාළ ලියකියවිලි නැත.