Dormakaba Rose ජෛවමිතික දොර අගුළු පරිශීලක අත්පොත

හැඳින්වීම

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Dormakaba Rose Biometric Digital Door Lock. Designed for modern access control, this lock offers advanced security features including fingerprint and PIN code access. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your device.

ආරක්ෂිත තොරතුරු

• ස්ථාපනය කිරීමට පෙර සියලුම සංරචක පවතින බවත් හානි නොවන බවත් සහතික කර ගන්න.
• Do not expose the lock to direct water or extreme temperatures.
• Use only specified AAA alkaline batteries. Do not mix old and new batteries.
• Keep fingerprints and PIN codes confidential.
• For emergency power, use a Type C USB cable with a compatible power source.
• This lock is designed for internal doors with a thickness of 32-50mm.

නිෂ්පාදනය අවසන්view සහ සංරචක

The Dormakaba Rose Biometric Door Lock integrates a fingerprint scanner, a backlit keypad, and a lever handle for secure and convenient access. It is designed for easy installation and reversible for left or right-handed doors.

රූපය 1: ඉදිරිපස view of the Dormakaba Rose Biometric Door Lock, highlighting the fingerprint sensor and keypad.

ප්රධාන සංරචක:

• ඇඟිලි සලකුණු සංවේදකය: For biometric access.
• Backlit Keypad: For PIN code entry (6-10 digits).
• ලීවර හසුරුව: For manual operation.
• බැටරි මැදිරිය: Holds 3 AAA alkaline batteries.
• USB-C වරාය: For emergency power.
• Dormakaba 60mm Tubular Deadlatch: Internal locking mechanism.

පිරිවිතර

සැකසුම සහ ස්ථාපනය

The Dormakaba Rose lock is designed for straightforward installation. It can be installed on both left and right-handed doors. Ensure your door thickness is between 32mm and 50mm.

Figure 2: Dormakaba Rose Biometric Door Lock installed on a door.

ස්ථාපන පියවර:

1. දොර සකස් කරන්න: Ensure the door is clean and the existing boreholes are compatible with the lock's dimensions. If necessary, drill new holes according to the provided template (not included in this manual, refer to packaging).
2. අගුල ස්ථාපනය කරන්න: Insert the dormakaba 60mm tubular deadlatch into the door edge. Secure it with screws.
3. භාරදීම තීරණය කරන්න: The lock is reversible. Adjust the lever handle direction if needed before final assembly.
4. කන්ද බාහිර එකලස් කිරීම: Feed the spindle and connecting cables through the latch and door. Position the exterior lock assembly.
5. මවුන්ට් අභ්‍යන්තර එකලස් කිරීම: Connect the cables from the exterior unit to the interior unit. Align the interior unit with the spindle and secure it to the exterior unit using the provided screws.
6. බැටරි ස්ථාපනය කරන්න: Open the battery cover on the interior unit and insert 3 AAA alkaline batteries, observing polarity.
7. පරීක්ෂණ මෙහෙයුම: After installation, test the lock's mechanical and electronic functions before closing the door.

මෙහෙයුම් උපදෙස්

The Dormakaba Rose lock offers multiple access methods and operating modes for enhanced security and convenience.

Initial Setup (First Use):

1. Upon first power-up, the lock will prompt for initial administrator setup. Follow the voice navigation prompts.
2. Register the first administrator fingerprint and/or PIN code. This administrator will have full control over user management.

ප්රවේශ මාතයන්:

• සම්මත මාදිලිය: Requires a single valid fingerprint or PIN code to unlock.
• ගමන් ප්‍රකාරය: Allows the door to remain unlocked for continuous access during specific periods. This mode is typically set by an administrator.
• Dual User Mode: Requires two different valid fingerprints or PIN codes to unlock, providing an extra layer of security.

දොර අගුළු හැරීම:

• ඇඟිලි සලකුණු භාවිතය: Place a registered finger on the fingerprint sensor. The lock will verify and unlock if successful.
• PIN කේතය භාවිතා කරමින්: Enter your registered 6-10 digit PIN code on the backlit keypad, then press the '#' key. The lock will verify and unlock if successful.

Emergency Power Option:

If the batteries are completely drained, the lock can be temporarily powered using a Type C USB cable connected to an external power bank or adapter. Connect the USB-C cable to the port on the exterior unit, then use your fingerprint or PIN code to unlock.

නඩත්තු කිරීම

Regular maintenance ensures the optimal performance and longevity of your Dormakaba Rose lock.

• පිරිසිදු කිරීම: Wipe the lock surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.
• බැටරි ආදේශනය: Replace all 3 AAA alkaline batteries when the low battery indicator appears or when voice prompts indicate low power. Do not mix old and new batteries.
• ඇඟිලි සලකුණු සංවේදකය: Keep the fingerprint sensor clean and free of dirt or moisture for accurate readings.
• යාන්ත්‍රික පරීක්ෂාව: Periodically check that the lever handle operates smoothly and the latch retracts fully.

දෝෂගවේෂණය

This section addresses common issues you might encounter with your Dormakaba Rose Biometric Door Lock.

වගකීම් සහ සහාය

Your Dormakaba Rose Biometric Door Lock comes with a වසර 1ක වගකීමක් මිලදී ගත් දින සිට. මෙම වගකීම් සහතිකය සාමාන්‍ය භාවිතය යටතේ නිෂ්පාදන දෝෂ සහ අක්‍රමිකතා ආවරණය කරයි.

වගකීම් බැහැර කිරීම්:

• Damage caused by improper installation or unauthorized repairs.
• Damage due to misuse, abuse, neglect, or accidents.
• සාමාන්ය ඇඳුම් ඇඳීම.
• Damage from natural disasters or power surges.

පාරිභෝගික සහාය:

For technical assistance, warranty claims, or further inquiries, please contact Dormakaba customer support. Refer to your product packaging or the official Dormakaba webනවතම සම්බන්ධතා තොරතුරු සඳහා අඩවිය.

වගකීම් වලංගු කිරීම සඳහා කරුණාකර ඔබගේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.