LEDOne Corp LED Wall Pack Instruction Manual

1. හැඳින්වීම

This manual provides comprehensive instructions for the installation, operation, and maintenance of the LEDOne Corp Multi-Watt LED Wall Pack. This fixture is designed for demanding outdoor lighting applications, offering selectable wattage (80W, 100W, 120W) and adjustable color temperature (3000K, 4000K, 5000K) to meet various lighting requirements efficiently.

2 ආරක්ෂිත තොරතුරු

WARNING: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.

• ස්ථාපනය කිරීමට හෝ සේවා කිරීමට පෙර පරිපථ කඩනයේ විදුලිය විසන්ධි කරන්න.
• සැපයුම් පරිමාව සහතික කරන්නtage is compatible with the fixture's operating voltage (120-277V).
• Do not handle energized fixtures with wet hands or when standing on wet or damp පෘෂ්ඨයන්.
• Use only UL/ETL approved components and wiring methods.
• වැටීම වැළැක්වීම සඳහා සවිකිරීම ආරක්ෂිතව සවි කර ඇති බවට සහතික වන්න.
• ආලෝකමත් වූ විට LED ආලෝක ප්‍රභවය දෙස කෙලින්ම නොබලන්න.

3. පැකේජ අන්තර්ගතය

ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න:

• LEDOne Corp LED Wall Pack Fixture
• උපදෙස් අත්පොත (මෙම ලේඛනය)
• දෘඪාංග සවිකිරීම

4. පිරිවිතර

5. පිහිටුවීම සහ ස්ථාපනය

The LEDOne Corp Wall Pack is designed for wall mounting and compatibility with standard junction boxes. Follow these steps for secure installation:

1. සකස් කිරීම: Ensure power is disconnected at the circuit breaker. Gather necessary tools (screwdriver, wire strippers, drill, mounting hardware).
2. සවිකරන ස්ථානය: Select a suitable wall surface capable of supporting the fixture's weight (approximately 10.63 lbs). The fixture features reinforced mounting points.
3. සවිකරන වරහන: Attach the wall mount bracket (if separate) or position the fixture directly over the junction box. Mark and drill pilot holes for the mounting screws.
4. ආරක්ෂිත සවිකිරීම: Secure the fixture to the wall using the provided mounting hardware. Ensure it is firmly attached and level.
5. රැහැන් ඇදීම: Open the wiring compartment. Connect the fixture's wires to the supply wires from the junction box:
   • කළු වයර් සිට රේඛාව (L) දක්වා
   • සුදු වයරය සිට උදාසීන (N) දක්වා
   • Green wire to Ground (G)
   Use the provided waterproof wire nuts for secure outdoor connections. For 0-10V dimming, connect the purple wire to DIM+ and the gray wire to DIM-.
6. වසා දැමීමේ මැදිරිය: Carefully tuck all wires into the junction box and wiring compartment. Close and seal the compartment cover to maintain IP65 rating.
7. බල ගැන්වීම: පරිපථ කඩනයෙහි බලය යථා තත්ත්වයට පත් කර සවිකිරීම පරීක්ෂා කරන්න.

රූපය 1: පසුපස view of the LED wall pack, illustrating the mounting points and the central access for electrical wiring connections.

රූපය 2: පැති ප්‍රෝfile of the LED wall pack, showing the robust construction and a visible screw for secure mounting.

6. මෙහෙයුම් උපදෙස්

The LEDOne Corp Wall Pack features adjustable wattage and color temperature settings, typically controlled by internal switches. These switches are usually located within the wiring compartment or on the side of the LED driver housing, accessible after opening the fixture.

රූපය 3: ඉදිරිපස view of the LED wall pack with the protective lens removed, revealing the array of LED chips and the internal switches for adjusting wattage සහ CCT.

1. Wat සකස් කිරීමtage:
   • Ensure power is disconnected before opening the fixture.
   • වොට් එක සොයා ගන්නtage selection switch (often labeled WATT or POWER).
   • අවශ්ය වොට් තෝරන්නtage: 80W, 100W, or 120W.
   • Close the fixture securely before restoring power.
2. වර්ණ උෂ්ණත්වය සකස් කිරීම (CCT):
   • Ensure power is disconnected before opening the fixture.
   • Locate the CCT selection switch (often labeled CCT or TEMP).
   • Select the desired color temperature: 3000K (warm white), 4000K (cool white), or 5000K (daylight).
   • Close the fixture securely before restoring power.
3. 0-10V අඳුරු වීම: This fixture supports 0-10V dimming. Connect a compatible 0-10V dimmer to the purple (DIM+) and gray (DIM-) wires during installation.
4. Photocell/Motion Sensor: The fixture may include or be compatible with external photocells or motion sensors for automated operation. Refer to the specific sensor's instructions for integration.

රූපය 4: කෝණික view of the LED wall pack, showcasing its complete assembly and the illuminated LED array.

7. නඩත්තු කිරීම

The LEDOne Corp Wall Pack is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.

• පිරිසිදු කිරීම: Periodically clean the outer lens and housing with a soft, damp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
• පරීක්ෂාව: Annually inspect the fixture for any signs of physical damage, loose connections, or wear on the wiring. Address any issues promptly.
• මුද්රා: Ensure all seals and gaskets are intact to maintain the IP65 weatherproof rating.

8. දෝශ නිරාකරණය

If the fixture is not operating correctly, refer to the following common issues and solutions:

If troubleshooting steps do not resolve the issue, contact LEDOne Corp customer support.

9. වගකීම් තොරතුරු

The LEDOne Corp Multi-Watt LED Wall Pack is backed by a comprehensive වසර 5ක වගකීමක්. This warranty covers defects in materials and workmanship under normal use and service. For warranty claims or detailed terms and conditions, please contact LEDOne Corp customer support.

10. සහාය සහ සම්බන්ධතා

For further assistance, technical support, or inquiries regarding your LEDOne Corp product, please visit the official LEDONE Store or contact customer service:

Visit the LEDONE Store on Amazon