ZIBOO ET1013 Digital Manometer User Manual

1. හැඳින්වීම

The ZIBOO ET1013 Digital Manometer is a precision instrument designed for measuring gauge and differential pressure in various applications. It offers 11 selectable pressure units and features data hold, recording, and zero functions for accurate and reliable measurements. This manual provides essential information for the safe and effective use of your manometer.

2 ආරක්ෂිත තොරතුරු

උපකරණයට තුවාල හා හානි වැළැක්වීම සඳහා සෑම විටම පහත සඳහන් ආරක්ෂක පියවරයන් නිරීක්ෂණය කරන්න:

උපාංගයේ උපරිම පීඩන අගය නොඉක්මවන්න.
Ensure proper connection of pressure tubes to avoid leaks or disconnections during operation.
උපාංගය අධික උෂ්ණත්වයන්, ආර්ද්‍රතාවය සහ විඛාදන පරිසරයන්ගෙන් ඈත් කර තබන්න.
Do not attempt to disassemble or modify the instrument. Refer servicing to qualified personnel.
උපාංගය දිගු කාලයක් භාවිතා නොකරන්නේ නම් බැටරි ඉවත් කරන්න.

3. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

1 x ZIBOO ET1013 Digital Manometer
1 x මෙවලම් බෑගය
1 Pair x RMA316 Manometer Tube Adapter
4 x Soft Tubes
1 x පරිශීලක අත්පොත

ZIBOO ET1013 Manometer package contents including device, bag, adapters, tubes, and manual.

Figure 3.1: Contents included in the ZIBOO ET1013 package.

4. නිෂ්පාදන අවසන්view

4.1. Device Layout and Functions

ZIBOO ET1013 Digital Manometer showing buttons for UNIT, HOLD, DIF, REC, Backlight, and Power.

රූපය 4.1: ඉදිරිපස view of the ZIBOO ET1013 Digital Manometer with key functions labeled.

UNIT බොත්තම: Cycles through 11 selectable pressure units.
රැඳවුම් බොත්තම: Freezes the current displayed reading. Press again to release.
DIF Button: Activates differential pressure mode, displaying the difference between two pressure inputs.
REC බොත්තම: Enters recording mode to view maximum, minimum, and average values. Long press to exit.
Backlight බොත්තම: Toggles the LCD backlight on/off for improved visibility in low-light conditions.
බල බොත්තම: උපාංගය සක්රිය හෝ අක්රිය කරයි.

4.2. LCD සංදර්ශක අතුරුමුහුණත

ZIBOO ET1013 Digital Manometer LCD display showing differential pressure mode, hold data, pressure measurement, Max/Min mode, and pressure units.

රූපය 4.2: සවිස්තරාත්මක view of the LCD display showing various indicators and readings.

The large LCD display provides clear readings, including:

Differential Pressure Mode indicator.
Hold Data indicator.
Pressure Measurement value.
MIN/MAX/AVG recording mode indicators.
Selected Pressure Unit.

4.3. Dual Channel Inputs

Close-up of the ZIBOO ET1013 Manometer showing the dual channel input ports.

Figure 4.3: The dual channel input ports for pressure measurement.

The manometer features two input ports for measuring differential pressure. These ports are clearly marked with '+' and '-' for positive and negative pressure connections.

4.4. මානයන්

Dimensions of the ZIBOO ET1013 Digital Manometer: 5.7 inches long, 2 inches wide, 1.2 inches thick.

Figure 4.4: Physical dimensions of the ZIBOO ET1013 Digital Manometer.

The compact and slim design (approximately 5.79" x 2.16" x 1.26") allows for easy one-handed operation and portability.

5. පිහිටුවීම

5.1. බැටරි ස්ථාපනය

The ZIBOO ET1013 Manometer requires a 9V battery (not included). To install:

උපාංගයේ පිටුපස බැටරි මැදිරි කවරය සොයා ගන්න.
Use a small screwdriver to open the battery compartment.
නිවැරදි ධ්‍රැවීයතාව සහතික කරමින් නව 9V බැටරියක් ඇතුළු කරන්න.
බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.

Video 5.1: Unboxing and battery installation for a similar digital manometer. This demonstrates the general process for installing the 9V battery.

5.2. Connecting Pressure Tubes

Connect the provided soft tubes to the manometer's input ports and to the pressure source you wish to measure.

Attach one end of a soft tube to the '+' port on the manometer.
Attach the other end of the tube to the high-pressure side of your system.
For differential pressure, attach a second soft tube to the '-' port and to the low-pressure side of your system.
Use the RMA316 tube adapters if required for specific connections.

Close-up of a pagoda pressure connector with a soft tube attached, illustrating how to connect the tubes to the manometer.

රූපය 5.2: උදාample of connecting a soft tube to a pagoda pressure connector.

6. මෙහෙයුම් උපදෙස්

6.1. බලය සක්‍රිය / අක්‍රිය කරන්න

ඔබන්න බලය button to turn the manometer on. The device will perform a self-test and display readings. To turn off, press the බලය button again. The device features an auto power-off function after 20 minutes of inactivity to conserve battery life.

6.2. ඒකකය තෝරා ගැනීම

ඔබන්න ඒකකය button to cycle through the 11 available pressure units (e.g., psi, kPa, bar, inHg, mmHg, inH₂O, ftH₂O, cmH₂O, ozin², kgfcm², mbar). The selected unit will be displayed on the LCD.

Video 6.1: Demonstration of unit selection and other basic operations on a digital manometer.

6.3 දත්ත රඳවා තබා ගැනීම

ඔබන්න අල්ලා ගන්න button to freeze the current reading on the display. The 'HOLD' indicator will appear. Press the button again to release the hold function and resume live readings.

6.4. Recording (MIN/MAX/AVG)

ඔබන්න REC button to enter recording mode. The display will show the maximum (MAX), minimum (MIN), and average (AVG) pressure values recorded since entering this mode. Short press the REC button to cycle through MAX, MIN, and AVG values. Long press the REC button for 5 seconds to exit recording mode.

වීඩියෝ 6.2: අවසන්view of features including data recording and unit options on a digital manometer.

6.5. Differential Pressure Measurement

To measure differential pressure, connect the high-pressure source to the '+' port and the low-pressure source to the '-' port. Press the DIF button. The display will show the pressure difference between the two inputs. Pressing the DIF button again will reset the differential measurement to zero, allowing for quick offset correction.

6.6 පසුතල ආලෝකය

ඔබන්න පසුතල ආලෝකය button (often indicated by a light bulb icon) to turn the LCD backlight on or off. This feature enhances readability in dimly lit environments.

7. යෙදුම්

The ZIBOO ET1013 Digital Manometer is suitable for a wide range of professional and industrial applications, including:

HVAC system diagnostics and maintenance.
Pneumatic control system testing.
Medical equipment pressure verification.
Gas appliance service and installation.
Laboratory testing and research.
Computer peripheral pressure monitoring.
Optimizing production processes in various industries.

Images depicting various application scenarios for a digital manometer, including chemical fiber industry, pressure parts, HVAC systems, and clean rooms.

Figure 7.1: Diverse applications of the digital manometer in industrial and technical settings.

8. පිරිවිතර

The following table outlines the technical specifications of the ZIBOO ET1013 Digital Manometer:

විශේෂාංගය	විස්තරය
ප්රදර්ශනය කරන්න	ද්විත්ව LCD
නිරවද්යතාව	±0.3%FSO (25°C)
පුනරාවර්තන හැකියාව	±0.2% (Max +/-0.5%FSO)
රේඛීය / හිස්ටෙරෙසිස්	±0.29%FSO
උපරිම පීඩනය	10psi (HT-1890)
ප්‍රතිචාර කාලය	සාමාන්‍ය තත්පර 0.5
අඩු බැටරි දර්ශකය	ඔව්
සීමාව ඉක්මවා දර්ශකය	දෝෂ.1
පරාස දර්ශකය යටතේ	දෝෂ.2
මෙහෙයුම් කොන්දේසි	32°F සිට 122°F (0 සිට 50°C)
ගබඩා කොන්දේසි	14°F සිට 140°F (-1 සිට 60°C)
බල සැපයුම	1x 9V Battery (not included) or External 9VDC
සම්මත උපාංග	මල්ල සහ නල
අයිතමයේ බර	300 ග්රෑම්
පාර්සල් මානයන්	20.6 x 10.9 x 5.69 සෙ.මී

Table showing parametric indicators for the ZIBOO ET1013 Digital Manometer, including display type, accuracy, repeatability, maximum pressure, and operating conditions.

Figure 8.1: Parametric indicators of the ZIBOO ET1013 Digital Manometer.

9. නඩත්තු කිරීම

To ensure the longevity and accuracy of your ZIBOO ET1013 Digital Manometer:

පිරිසිදු කිරීම: මෘදු වියළි රෙද්දකින් උපාංගය පිස දමන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක භාවිතා නොකරන්න.
ගබඩා: Store the manometer in its protective tool bag in a cool, dry place when not in use. Avoid areas with high humidity or extreme temperatures.
බැටරි: Replace the 9V battery when the low battery indicator appears on the display. Remove the battery if storing the device for extended periods to prevent leakage.
Tubes and Adapters: Inspect pressure tubes and adapters regularly for wear, cracks, or blockages. Replace them if damaged to maintain measurement integrity.

10. දෝශ නිරාකරණය

If you encounter issues with your ZIBOO ET1013 Digital Manometer, refer to the following common problems and solutions:

කිසිදු සංදර්ශකයක්/උපාංගයක් ක්‍රියාත්මක නොවේ: Check battery installation and ensure the battery has sufficient charge. Replace the 9V battery if necessary.
වැරදි කියවීම්: Ensure pressure tubes are securely connected and free from kinks or leaks. Perform a zero-adjustment if needed (by pressing the DIF button to reset differential measurement). Verify the correct pressure unit is selected.
'Err.1' Displayed: Indicates an over-range condition. The measured pressure exceeds the device's maximum capacity. Reduce the applied pressure.
'Err.2' Displayed: Indicates an under-range condition. The measured pressure is below the device's minimum capacity.
අඩු බැටරි දර්ශකය: අඛණ්ඩ නිවැරදි ක්‍රියාකාරිත්වය සහතික කිරීම සඳහා 9V බැටරිය වහාම ප්‍රතිස්ථාපනය කරන්න.

මෙහි ආවරණය නොවන අඛණ්ඩ ගැටළු සඳහා, කරුණාකර පාරිභෝගික සහාය අමතන්න.

11. වගකීම් සහ සහාය

Specific warranty details and support contact information may vary by region and retailer. Please refer to the documentation provided with your purchase or contact the manufacturer directly for assistance.