හැඳින්වීම
This manual provides essential information for the safe and efficient operation of your VEVOR Solar Fence Charger (Model TT-P9). This device is designed to provide a powerful electric pulse to deter animals from entering or exiting a fenced area, ensuring the security of crops, livestock, and pets. Please read these instructions thoroughly before installation and use.
ආරක්ෂිත තොරතුරු
- Always disconnect the energizer from the fence and power source before performing any maintenance or repairs.
- Do not connect the energizer to mains-operated equipment, including battery chargers, unless specifically instructed.
- Ensure proper grounding of the electric fence system. A dedicated grounding stake is crucial for effective operation and safety.
- Keep children and unauthorized personnel away from the electric fence. Post warning signs at appropriate intervals.
- Avoid touching the fence wires directly when the energizer is active.
- Do not install the energizer in areas prone to flooding or excessive moisture without adequate protection. The unit has an IP65 rating, but extreme conditions should be avoided.
පැකේජයේ අන්තර්ගතය
The VEVOR Solar Fence Charger package includes the following items:
- 1 x Solar Fence Charger (Model TT-P9)
- Connection cables (red for fence, black for ground)
- Power adapter for initial charging (if applicable, check specific model)
- උපදෙස් අත්පොත
වීඩියෝ විස්තරය: This video provides an unboxing of a Solar Fence Charger S50, demonstrating the contents of the package and initial setup steps. While the model number differs, the general components and unboxing process are similar to the VEVOR TT-P9.
පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| ආදර්ශ අංකය | ටීටී-පී 9 |
| ප්රතිදාන වෙළුමtage | 10 kV දක්වා |
| ප්රතිදාන ශක්තිය | 1 ජූල් |
| Discharge Interval | ස්පන්දනයකට තත්පර 2 ක් |
| ස්පන්දන පළල | <මිති 1 |
| බැටරි වර්ගය | ඉදිකළ ලිතියම් බැටරි |
| බැටරි ධාරිතාව | 8100mAh |
| Battery Life (without sun) | 4-5 දින |
| සූර්ය පැනල බලය | 10W |
| ජල ආරක්ෂිත ශ්රේණිගත කිරීම | IP65 (Outdoor Waterproof) |
| මෙහෙයුම් උෂ්ණත්වය | -20°C සිට +50°C (-4°F සිට 122°F) |
| නිර්දේශිත ඵලදායී පරාසය | කිලෝමීටර් 1-3 |
| ප්රධාන ද්රව්ය | ABS |
| නිෂ්පාදන මානයන් (L x W x H) | 10.24 x 8.27 x 3.54 අඟල් (260 x 210 x 90 මි.මී.) |
| Solar Panel Dimensions (L x W x H) | 11.02 x 9.45 x 0.71 අඟල් (280 x 240 x 18 මි.මී.) |
| නිෂ්පාදන ශුද්ධ බර | රාත්තල් 5.93 (කිලෝග්රෑම් 2.69) |
රූප විස්තරය: A detailed graphic displaying the dimensions of the VEVOR Solar Fence Charger and its solar panel, along with key specifications like model number, battery type, voltage, and materials.
සැකසුම සහ ස්ථාපනය
Proper installation is crucial for the effective and safe operation of your solar fence charger. Follow these steps carefully:
1. මූලික අයකිරීම
Before first use, fully charge the energizer using the provided DC adapter for 5-7 hours. This ensures the internal lithium battery is at optimal capacity.
වීඩියෝ විස්තරය: This video demonstrates the installation process for a solar fence charger, including initial charging, mounting, grounding, and connecting to the fence. The model shown is similar in function and design.
වීඩියෝ විස්තරය: This video illustrates the battery installation process for a solar electric fence charger. It shows how to access the battery compartment, connect the battery wires, and secure the battery within the unit.
2. Mounting the Energizer
Mount the charger on a sturdy post (e.g., Y/T post) in a location that receives maximum direct sunlight throughout the day. The solar panel can rotate 180° to optimize sun exposure.
රූප විස්තරය: The VEVOR Solar Fence Charger is shown mounted on a wooden post, connected to an electric fence protecting a crop field from a gopher. This illustrates a typical installation scenario.
රූප විස්තරය: A visual representation highlighting the 180° rotation feature of the solar panel, allowing users to adjust its angle for maximum sunlight absorption and efficient charging.
3. භූගත කිරීම
Proper grounding is essential. Place the grounding stake on moist ground for better conductivity. The recommended depth for stakes (copper/iron) is 31.5-39.37 inches (80-100 cm) for optimal grounding.
4. Connecting to the Fence
Connect the red output terminal of the energizer to the electric fence wire. Connect the black ground terminal to the grounding stake. Ensure all connections are secure.
වීඩියෝ විස්තරය: This video demonstrates the installation and pre-use charging of an S800 Solar Fence Charger, covering mounting, wiring, and initial power-up. The principles apply to the VEVOR TT-P9 model.
මෙහෙයුම් උපදෙස්
Once installed and connected, the VEVOR Solar Fence Charger operates automatically. The integrated solar panel charges the internal battery during the day, and the energizer delivers a consistent electric pulse to the fence.
- බල ගැන්වීම: Ensure the unit is switched on. The automatic pulse function will begin, delivering up to 10kV voltage and 1J of shock energy with a 2-second discharge interval.
- සූර්ය ආරෝපණය: The 10W high-efficiency monocrystalline silicon solar panel charges the 8100mAh lithium battery. This allows for continuous operation without external power sources, even in low-light conditions.
- දිගු කළ ධාවන කාලය: The built-in battery provides 4-5 days of power, ensuring stable operation during cloudy or sunless periods.
- ස්පන්දන කාර්යය: The automatic pulse function provides a stable output designed to deter animals effectively without causing permanent harm.
රූප විස්තරය: The VEVOR Solar Fence Charger is shown in an outdoor setting with sheep, emphasizing its IP65 waterproof design and wide operating temperature range for reliable protection in various weather conditions.
රූප විස්තරය: A comparative image illustrating the advantages of the VEVOR Solar Fence Charger's lithium battery (lasts 4-5 days in rainy weather, longer lifespan, solar-powered & lightweight) over traditional lead-acid batteries.
රූප විස්තරය: This graphic presents various fence wiring configurations (single-wire, multi-wire) and recommended spacing (5-10m between posts) for effective wildlife deterrence using the VEVOR Solar Fence Charger.
නඩත්තු කිරීම
To ensure the longevity and optimal performance of your VEVOR Solar Fence Charger, regular maintenance is recommended:
- පිරිසිදු සූර්ය පැනලය: Periodically clean the solar panel surface to remove dust, dirt, or debris that may reduce charging efficiency. Use a soft, damp රෙදි.
- සම්බන්ධතා පරීක්ෂා කරන්න: Regularly inspect all electrical connections (fence wire, ground wire, battery terminals) to ensure they are tight and free from corrosion.
- වැට රේඛාව පරීක්ෂා කරන්න: Keep the fence line clear of vegetation, which can reduce the effectiveness of the electric pulse by grounding the fence.
- බැටරි සෞඛ්යය: While the lithium battery is designed for long life, monitor its performance. If the energizer's output weakens significantly or runtime decreases, ensure the solar panel is receiving adequate sunlight and consider a full charge via the DC adapter.
දෝෂගවේෂණය
If you encounter issues with your VEVOR Solar Fence Charger, consider the following common troubleshooting steps:
- No Pulse/Weak Pulse:
- Check all connections: Ensure the fence wire, ground wire, and battery connections are secure.
- Verify Grounding: Make sure the grounding stake is firmly in moist soil and adequately deep.
- Inspect Fence Line: Clear any vegetation touching the fence wires.
- Check Battery Charge: Ensure the battery is fully charged. Allow the solar panel to charge for a full day in direct sunlight or use the DC adapter.
- Solar Panel Obstruction: Ensure the solar panel is clean and free from obstructions.
- කෙටි ධාවන කාලය:
- Insufficient Sunlight: Relocate the unit to an area with more direct sunlight or adjust the solar panel angle.
- Excessive Load: Check for shorts or excessive current draw on the fence line.
- Aging Battery: If the battery is old, its capacity may have diminished.
වගකීම් සහ සහාය
වගකීම් තොරතුරු, තාක්ෂණික සහාය හෝ සේවා විමසීම් සඳහා, කරුණාකර ඔබේ මිලදී ගැනීමේ ලියකියවිලි සමඟ සපයා ඇති සම්බන්ධතා තොරතුරු වෙත යොමු වන්න හෝ නිල VEVOR වෙත පිවිසෙන්න. webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.





