1. හැඳින්වීම සහ අවසන්view
The SmallRig RS20 Mini Camera Flash is a compact and powerful GN12 speedlite designed for mirrorless cameras, offering professional-grade lighting in a portable form factor. It features a built-in 2000mAh battery, an intuitive OLED screen for precise control, and rapid recycling times, making it ideal for various photography scenarios.

ප්රධාන ලක්ෂණ ඇතුළත් වේ:
- Pro-Brightness in Palm Size: Delivers 200W COB Light-equivalent output at only 4.5oz (128g).
- දිගු බැටරි ආයු කාලය: 2000mAh lithium battery supports 500+ flashes at maximum power, with a 3-hour full charge time via USB-C.
- වේගවත් ප්රතිචක්රීකරණ කාලය: Achieves 0.1s recycle at minimum power and 1.8s at full burst.
- OLED Display Precision Control: Intuitive interface with 8 power levels and 22 steps (1/1 to 1/128 plus 0.3-step fine-tuning).
- Universal Hot Shoe Compatibility: Mounts directly onto mirrorless cameras from Canon, Sony, Nikon, Fujifilm, and Olympus without adapters.
- Wireless Multi-Flash Sync: Supports advanced optical synchronization for professional lighting setups.
2. පෙට්ටියේ ඇති දේ
සියලුම සංරචක පැකේජයේ ඇති බව තහවුරු කර ගන්න:
- ෆ්ලෑෂ් x 1
- USB-C ආරෝපණ කේබල් x 1
- ගබඩා බෑගය x 1
- මෙහෙයුම් උපදෙස් x 1

3. පිහිටුවීම
3.1 බැටරිය ආරෝපණය කිරීම
Before first use, fully charge the built-in 2000mAh lithium battery. Use the provided USB-C charging cable and connect it to a 5V 1A power source. A full charge typically takes approximately 3 hours.


3.2 ෆ්ලෑෂ් සවි කිරීම
The SmallRig RS20 Mini Flash is designed with a universal single contact hot shoe, ensuring broad compatibility with most mirrorless cameras from brands like Canon, Sony, Nikon, Fujifilm, and Olympus.
- ඔබගේ කැමරාව ක්රියා විරහිත කර ඇති බවට වග බලා ගන්න.
- Slide the hot shoe mount of the RS20 flash into your camera's hot shoe slot until it clicks securely into place.
- Ensure the flash is firmly seated to maintain a stable connection.


4. මෙහෙයුම් උපදෙස්
4.1 බලය සක්රිය / අක්රිය
Locate the power switch on the side of the flash unit. Slide it to the 'ON' position to power on the device. Slide it to the 'OFF' position to power off.
4.2 බල මට්ටම් සකස් කිරීම
The RS20 features an intuitive OLED display for precise control over flash output. It offers 8 power levels and 22 steps, ranging from 1/1 (full power) to 1/128, with 0.3-step fine-tuning capability.
- Use the 'MODE' button to cycle through available modes (e.g., Manual, Optical Slave).
- Use the '+' and '-' buttons to adjust the flash power output according to your lighting needs. The OLED screen will display the current power setting.

4.3 Recycling Time
The RS20 Mini Flash boasts a fast recycling time, allowing for rapid consecutive shots. It can recycle in 0.1 seconds at minimum power and 1.8 seconds at full power, enabling the capture of up to 8 photos within 3 seconds.


4.4 Wireless Multi-Flash Sync
The RS20 supports advanced optical synchronization, allowing you to build professional multi-flash lighting setups. You can designate units as transmitters or responders for complex lighting scenarios such as 3-point studio portraiture or 360° product shoots.


5. නඩත්තු කිරීම
To ensure the longevity and optimal performance of your SmallRig RS20 Mini Camera Flash, follow these maintenance guidelines:
- පිරිසිදු කිරීම: Use a soft, dry cloth to wipe the exterior of the flash. For stubborn dirt, slightly dampen the cloth with water. Avoid using strong detergents or solvents.
- ගබඩා: When not in use, store the flash in its provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- බැටරි සත්කාර: දිගු කාලයක් ගබඩා කරන්නේ නම්, බැටරි සෞඛ්යය ආරක්ෂා කර ගැනීම සඳහා සෑම මාස තුනකට වරක් බැටරිය ආසන්න වශයෙන් 50% දක්වා ආරෝපණය කරන්න.
- බලපෑමෙන් වළකින්න: අභ්යන්තර සංරචක වලට හානි කළ හැකි බිංදු සහ බලපෑම් වලින් ෆ්ලෑෂ් එක ආරක්ෂා කරන්න.
6. දෝශ නිරාකරණය
If you encounter issues with your SmallRig RS20 Mini Camera Flash, refer to the following common problems and solutions:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ෆ්ලෑෂ් බලය ක්රියාත්මක නොවේ. | බැටරිය අවසන් වී හෝ ආරෝපණය වී නොමැත. | Charge the flash using the USB-C cable. Ensure the power switch is in the 'ON' position. |
| ෆ්ලෑෂ් එක පත්තු වෙන්නේ නැහැ. | Incorrect mounting or poor hot shoe contact. Flash is in an incompatible mode. | Ensure the flash is securely mounted on the camera's hot shoe. Check the flash mode settings on the OLED display. |
| මන්දගාමී ප්රතිචක්රීකරණ කාලය. | Battery is low. Flash is set to full power. | Recharge the battery. Reduce the flash power output. |
| OLED සංදර්ශකය හිස් හෝ ප්රතිචාර නොදක්වයි. | උපාංගයේ අක්රිය වීම. | Try powering the unit off and on again. If the issue persists, contact customer support. |
If the problem persists after attempting these solutions, please contact SmallRig customer support for further assistance.
7. පිරිවිතර
Detailed technical specifications for the SmallRig RS20 Mini Camera Flash (Model: 5374):
| පිරිවිතර | වටිනාකම |
|---|---|
| නිෂ්පාදන මානයන් | 2.8 x 2.9 x 1.8 inches (46.0 × 71.0 × 73.0mm) |
| අයිතමයේ බර | 4.5 ounces (128.0 ± 5.0g) |
| ආදර්ශ අංකය | 5374 |
| බැටරි වර්ගය | Nonstandard Battery (included) |
| බැටරි ධාරිතාව | 3.7V 2000mAh |
| ආරෝපණ බලය | 5V 1A |
| ආරෝපණ කාලය | පැය 3 යි |
| Flash Count (Max Power) | වෙඩි 500 ක් |
| Recycle Time (Max Power) | තත්පර 1.8 යි |
| Power Adjustment Levels | 8 stops (1/1 to 1/128) |
| මාර්ගෝපදේශ අංකය | GN12 |
| වර්ණ උෂ්ණත්වය | 6500K |
| උපරිම සමමුහුර්ත වේගය | තත්පර 1/250 |
| අනුකූල සවි කිරීම් | Universal Hot Shoe Mount |
| ද්රව්ය | ABS ප්ලාස්ටික් |

8. වගකීම් සහ සහාය
SmallRig products are designed for reliability and performance. For warranty information and customer support, please refer to the official SmallRig webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවයට සෘජුවම සම්බන්ධ වන්න. ඕනෑම වගකීම් හිමිකම් සඳහා මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.
අමතර සම්පත් සහ නිෂ්පාදන තොරතුරු සඳහා, පිවිසෙන්න Official SmallRig Store on Amazon.





