Goosky E2 UH-1Y

Goosky E2 UH-1Y RC Helicopter User Manual

Model: E2 UH-1Y

1. හැඳින්වීම

This manual provides essential information for the safe and efficient operation of your Goosky E2 UH-1Y RC Helicopter. Please read this manual thoroughly before operating the helicopter to ensure proper setup, flight, and maintenance. Retain this manual for future reference.

The Goosky E2 UH-1Y is a 1/35 scale 2.4G 6CH dual brushless direct drive RC rescue helicopter featuring GPS positioning, Lidar, hands-free hovering, and switchable flight modes.

2. ආරක්ෂිත මාර්ගෝපදේශ

Operating an RC helicopter requires caution. Failure to operate safely can result in injury or property damage. Always follow these guidelines:

  • මිනිසුන්, සතුන් සහ බාධක වලින් ඈත්ව විවෘත ප්‍රදේශවල ක්‍රියාත්මක වන්න.
  • Maintain a safe distance from the helicopter during flight.
  • Do not operate near power lines, roads, or water bodies.
  • Ensure all batteries are fully charged before each flight.
  • Inspect the helicopter for any damage before and after each flight.
  • Keep hands and face clear of rotating blades.
  • තද සුළං හෝ අයහපත් කාලගුණික තත්ත්වයන් යටතේ ක්‍රියා නොකරන්න.
  • වයස අවුරුදු 16 ට අඩු පරිශීලකයින් සඳහා වැඩිහිටි අධීක්ෂණය නිර්දේශ කෙරේ.

3. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

  • 1x රැගෙන යන නඩුව
  • 1x Goosky E2 UH-1Y RC Helicopter
  • 1x පරිශීලක අත්පොත
  • 1x Dedicated Charger
  • 1x Smart Battery (3S 11.1V 1600mAh 30C LiPo)
  • 1x 2.4G A8 Rechargeable Remote Control
  • 1x Extra Main Shaft
  • විවිධ මෙවලම්
  • අමතර ඉස්කුරුප්පු
Goosky E2 UH-1Y RC Helicopter front-side view

රූපය 3.1: ඉදිරිපස පැත්ත view of the Goosky E2 UH-1Y RC Helicopter.

Goosky E2 UH-1Y RC Helicopter rear-side view

රූපය 3.2: පසුපස පැත්ත view of the Goosky E2 UH-1Y RC Helicopter, showing the tail rotor.

4. පිහිටුවීම

4.1 බැටරි ආරෝපණය කිරීම

The helicopter is powered by a 3S 11.1V 1600mAh 30C Smart LIPO battery. The remote control uses a 2800mAh battery. Use the dedicated charger provided to charge both batteries.

  1. Connect the dedicated charger to a power source.
  2. Connect the helicopter's smart battery to the charger.
  3. Connect the remote control's battery to its charging port (Type-C for the T8 transmitter).
  4. Allow approximately 90 minutes for a full charge of the helicopter battery. The charger's indicator will show charging status.
  5. Always supervise charging and disconnect batteries once fully charged.

4.2 සම්ප්‍රේෂක සකස් කිරීම

The 2.4G A8 remote control is included. Ensure it is fully charged before use.

  1. දුරස්ථ පාලකය ක්රියාත්මක කරන්න.
  2. Select the desired flight mode (Mode 1 or Mode 2) if applicable. Refer to the transmitter's specific manual for detailed mode switching instructions.
  3. Perform a range check before the first flight in a new environment.

4.3 Helicopter Pre-Flight Check

  1. Ensure the main and tail rotor blades are securely attached and free from damage.
  2. Check all linkages and servos for free movement and secure connections.
  3. Insert the fully charged smart battery into the helicopter's compartment. The quick-release canopy allows easy access.
  4. Power on the helicopter. Wait for GPS signal acquisition if flying outdoors.

5. මෙහෙයුම් උපදෙස්

The Goosky E2 UH-1Y features advanced flight stabilization and positioning systems for ease of use.

5.1 මූලික පියාසැරි පාලනයන්

Familiarize yourself with the remote control's stick functions. The helicopter supports switchable Mode 1/2. Common controls include:

  • තෙරපුම: Controls rotor speed and altitude.
  • රඩ්ඩර් (යාව්): Controls the helicopter's rotation around its vertical axis.
  • Aileron (Roll): Tilts the helicopter left or right for sideways movement.
  • Elevator (Pitch): Tilts the helicopter forward or backward for forward/backward movement.

5.2 GPS Smart Satellite Positioning

The built-in GPS module provides real-time positioning and navigation, enhancing flight safety and control accuracy. In GPS mode, the E2 GPS automatically stabilizes itself when control sticks are released. It can hover at a fixed point and altitude automatically, simplifying operation for beginners.

Goosky E2 UH-1Y RC Helicopter demonstrating GPS positioning

Figure 5.1: GPS Smart Satellite Positioning in action, showing fixed-point hovering.

5.3 Vision + TOF Lidar System

The vision system provides horizontal displacement data, while the TOF (Time-of-Flight) Lidar sensor supplies vertical altitude data. Together, they form a three-dimensional spatial coordinate system in GPS-denied environments, enabling precise position and altitude hold, as well as intelligent return-to-home. This system assists in stable flight even for novice users.

Goosky E2 UH-1Y RC Helicopter illustrating Lidar and Vision system

Figure 5.2: Vision and TOF Lidar system for enhanced stability and positioning.

5.4 Intelligent Return-to-Home

The flight controller combines altitude and distance data to automatically plan a return route. When switched to Return-to-Home mode in GPS mode, the E2 GPS will return to the takeoff point, land, and shut off the motors. If the battery voltage drops too low during flight, automatic return will also be triggered, ensuring a safe flight experience.

Goosky E2 UH-1Y RC Helicopter demonstrating Intelligent Return-to-Home function

Figure 5.3: Intelligent Return-to-Home feature guiding the helicopter back to its starting point.

5.5 Flight Time

With a fully charged 11.1V 1600mAh LiPo battery, the helicopter can achieve up to 15 minutes of flight time. Always monitor battery levels during flight and land safely when low voltage warnings are issued.

6. නඩත්තු කිරීම

Regular maintenance ensures the longevity and safe operation of your Goosky E2 UH-1Y helicopter.

6.1 Post-Flight Inspection

  • Inspect main and tail rotor blades for cracks, chips, or deformation. Replace damaged blades immediately.
  • Check the landing gear for any damage or looseness.
  • Examine the fuselage for cracks or structural damage.
  • සියලුම ඉස්කුරුප්පු සහ ගාංචු තදින් ඇති බවට වග බලා ගන්න.

6.2 බැටරි රැකවරණය සහ ගබඩා කිරීම

  • Store LiPo batteries in a cool, dry place, away from direct sunlight and flammable materials.
  • බැටරි අධික ලෙස ආරෝපණය කිරීම හෝ අධික ලෙස විසර්ජනය නොකරන්න.
  • දිගු කාලයක් ගබඩා කරන්නේ නම්, බැටරි ධාරිතාවයෙන් ආසන්න වශයෙන් 50% දක්වා ආරෝපණය කරන්න.
  • Never puncture or damage LiPo batteries.

6.3 පිරිසිදු කිරීම

Use a soft, dry cloth to clean the helicopter. Avoid using solvents or harsh chemicals that could damage plastic or electronic components.

7. දෝශ නිරාකරණය

This section addresses common issues you might encounter with your Goosky E2 UH-1Y helicopter.

ගැටලුවවිය හැකි හේතුවවිසඳුම
Helicopter does not power on.බැටරිය ආරෝපණය වී නැත හෝ වැරදි ලෙස සම්බන්ධ වී ඇත.Ensure battery is fully charged and correctly inserted. Check power switch.
Unstable flight or difficulty hovering.Improper calibration, strong winds, or damaged blades.Perform calibration as per transmitter instructions. Avoid flying in strong winds. Inspect and replace damaged blades.
දුරස්ථ පාලකය ප්‍රතිචාර නොදක්වයි.Transmitter battery low, not paired, or out of range.Charge transmitter battery. Re-pair transmitter with helicopter. Ensure within 300m range.
GPS positioning inaccurate.Weak GPS signal, flying indoors, or magnetic interference.Fly in open outdoor areas. Avoid areas with high electromagnetic interference. Wait for sufficient GPS satellites to lock.
Automatic Return-to-Home not working.Not in GPS mode, insufficient GPS signal, or low battery.Ensure GPS mode is active and a strong GPS signal is acquired. Check battery level.

8. පිරිවිතර

විශේෂාංගයවිස්තර
මාදිලියේ නමGOOSKY E2 UH-1 GPS (RTF Version)
ද්රව්යප්ලාස්ටික් + ඉලෙක්ට්‍රොනික සංරචක
පරිමාණය1/35
රොටර් විෂ්කම්භය490 මි.මී
Single Body Weight538 ග්රෑම්
ඩ්‍රයිව් මෝටරයDual Brushless Direct Drive
දුරස්ථ පාලකය2.4G A8 Rechargeable Remote Control
දුරස්ථ පාලක දුරමීටර් 300 කි
ශරීර බැටරි3S 11.1V 1600mAh 30C Smart LIPO
චාජර්කැපවූ චාජර්
ආරෝපණ කාලයආසන්න වශයෙන්. විනාඩි 90 යි
ගුවන් ගමන් කාලය15 විනාඩි
නිෂ්පාදන මානයන්48.3 x 49 x 13.2 සෙ.මී
නිර්දේශිත වයස16 years and up (Manufacturer suggests 16 months, but for an RC helicopter of this complexity, 16 years is more appropriate for safety and skill level)
ආදර්ශ අංකයULB92CQP1WXKR4ML3358OA16C

9. වගකීම් සහ සහාය

For warranty information, technical support, or service inquiries, please refer to the official Goosky webවෙබ් අඩවියට හෝ ඔබේ බලයලත් අලෙවිකරු අමතන්න. මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

The product is designed for ease of use with features like quick-release canopy for battery access and app-based configuration support. For advanced settings or troubleshooting not covered in this manual, consult the manufacturer's online resources or customer service.

අදාළ ලියකියවිලි - E2 UH-1Y

පෙරview GOOSKY E2 හෙලිකොප්ටර් උපදෙස් අත්පොත
GOOSKY E2 රේඩියෝ පාලන හෙලිකොප්ටරය සඳහා සවිස්තරාත්මක උපදෙස් අත්පොත, එකලස් කිරීම, ක්‍රියාත්මක කිරීම, ආරක්ෂක පූර්වාරක්ෂාවන් සහ පිරිවිතරයන් ආවරණය කරයි. ඔබේ E2 හෙලිකොප්ටරය ආරක්ෂිතව එකලස් කිරීම, නඩත්තු කිරීම සහ පියාසර කරන්නේ කෙසේදැයි ඉගෙන ගන්න.
පෙරview Goosky S1 and S2 Helicopter User Manual and Flight Instructions
Comprehensive user manual for Goosky S1 and S2 remote-controlled helicopters. Covers battery charging, remote control T8 (RTF) operation, startup sequence, flight attempts, and damage limitation.
පෙරview GOOSKY RS7 RC හෙලිකොප්ටරය - පරිශීලක අත්පොත
GOOSKY විසින් සංවර්ධනය කරන ලද සහ XLPower RC SA විසින් බෙදා හරින ලද GOOSKY RS7 RC හෙලිකොප්ටරය පිළිබඳ සවිස්තර තොරතුරු. මෙම ආකෘතිය RC හෙලිකොප්ටර් වෙළඳපොලේ ආරම්භකයින් සඳහා සේවය කරමින් පියාසර ස්ථාවරත්වය සඳහා නිර්මාණය කර ඇත.
පෙරview Anleitung Goosky S1 und S2: Bedienung und Flugführung
Umfassende Anleitung zur Bedienung und zum Fliegen der Goosky S1 und S2 RC-Helikopter, inklusive Akkuladung, Fernsteuerungsfunktionen und Erstflug-Anweisungen.
පෙරview ගූස්කි E2 (GPS) ඉක්මන් ආරම්භක මාර්ගෝපදේශය
Goosky E2 (GPS) හෙලිකොප්ටරය සඳහා ඉක්මන් ආරම්භක මාර්ගෝපදේශයක්, සැකසුම, පියාසැරි මාදිලි, ක්‍රමාංකනය සහ ස්වයංක්‍රීය-නිවාස කාර්යයන් ආවරණය කරයි.
පෙරview GOOSKY E2 උපදෙස් අත්පොත: එකලස් කිරීම, ක්‍රියාත්මක කිරීම සහ ආරක්ෂක මාර්ගෝපදේශය
GOOSKY E2 රේඩියෝ පාලන හෙලිකොප්ටරය සඳහා සවිස්තරාත්මක උපදෙස් අත්පොත. මෙම මාර්ගෝපදේශය සවිස්තරාත්මක එකලස් කිරීමේ පියවර, අත්‍යවශ්‍ය ආරක්ෂක පූර්වාරක්ෂාවන්, තාක්ෂණික පිරිවිතර, පියාසැරි පරාමිති සැකසුම්, සම්ප්‍රේෂක ක්‍රියාකාරිත්වය සහ E2 මාදිලිය සඳහා අමතර කොටස් ලැයිස්තුවක් ආවරණය කරයි.