1. හැඳින්වීම
Thank you for choosing the BONTEC GDM7505 Ergonomic Gas Spring Single Monitor Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Please read this manual thoroughly before assembly and retain it for future reference.
2 ආරක්ෂිත තොරතුරු
ස්ථාපනය සහ භාවිතය අතරතුර පහත සඳහන් ආරක්ෂක පියවරයන් නිරීක්ෂණය කරන්න:
- එකලස් කිරීමට පෙර සියලුම සංරචක පවතින බවත් හානි නොවී ඇති බවත් සහතික කර ගන්න. කිසියම් කොටසක් අස්ථානගත වී හෝ දෝෂ සහිත නම් භාවිතා නොකරන්න.
- This monitor mount is designed for screens between 15 and 34 inches, with a maximum weight capacity of 26.5 lbs (12 kg). Do not exceed these limits.
- The gas spring mechanism is under high pressure. Do not attempt to disassemble the gas spring cylinder.
- Always use appropriate tools and follow the instructions carefully. Overtightening screws may cause damage.
- Ensure the desk surface is stable and thick enough to support the mount and monitor weight.
- ස්ථාපනය අතරතුර ළමුන් සහ සුරතල් සතුන් ඈත් කර තබන්න.
3. පැකේජ අන්තර්ගතය
පහත ලැයිස්තුගත කර ඇති සියලුම කොටස් ඔබේ පැකේජයට ඇතුළත් කර ඇති බව තහවුරු කරගන්න:
Image: All components of the BONTEC Monitor Arm, including the main arm sections, base, C-clamp, grommet parts, various screws, and Allen keys, are displayed on a white surface.
- A: Upper Arm with VESA Plate
- A1: Cable Cover for Upper Arm
- B: පහළ හස්තය
- C: පදනම
- D: සී-ක්ලබ්amp
- E: Brace for C-clamp
- F: Small Screws (for C-clamp/Grommet)
- G: Wingnut (for Grommet)
- H: Carriage Bolt (for Grommet)
- I, J, K: Allen Keys (various sizes)
- L: Small Screws (for VESA plate)
- M-A, M-B, M-C, M-D, M-E: Monitor Screws and Washers (various sizes for VESA mounting)
4. පිහිටුවීම සහ ස්ථාපනය
This section guides you through the assembly process. An assembly video is available for visual reference.
Video: Assembly Manual for BONTEC Upgraded Single Monitor Arm. This video demonstrates the complete installation process for the monitor arm, including both C-clamp and grommet mounting options, and attaching the monitor.
4.1. ඔබේ සවි කිරීමේ ක්රමය තෝරන්න
The BONTEC GDM7505 supports two installation methods: C-clamp and Grommet Base. Select the method suitable for your desk.
Image: This image illustrates the two available installation methods: C-clamp mounting, suitable for desk thicknesses from 0.39 to 3.15 inches, and Grommet mounting, for desk thicknesses from 0.39 to 2.76 inches and hole diameters from 0.39 to 2.36 inches.
4.1.1. C-clamp ස්ථාපනය
- Attach the Brace (E) to the Base (C) using the small screws (F).
- Fix the C-clamp (D) to the Brace (E) and tighten the screws securely.
- Place the assembled C-clamp onto your desk edge and tighten the clamp screw until the mount is stable. Use an Allen key for a more secure clamp.
4.1.2. Grommet Base Installation
- Remove the clip plate (D2) from the C-clamp (D) if it's attached.
- Tighten the Carriage Bolt (H) to the Base (C).
- Insert the bolt through the grommet hole in your desk.
- Secure the base from underneath the desk using the clip plate (D2) and Wingnut (G).
4.2. Install the Arm onto the Base
- Slide the Lower Arm (B) onto the pole of the installed Base (C).
- Tighten the set screw on the Lower Arm (B) using the appropriate Allen key (I or J) to secure it.
- Slide the Upper Arm (A) onto the Lower Arm (B).
- Tighten the set screw on the Upper Arm (A) using the appropriate Allen key (I or J) to secure it.
4.3. Attach VESA Plate to Monitor
- ඔබේ මොනිටරය මෘදු, පිරිසිදු මතුපිටක් මත ප්රවේශමෙන් මුහුණත පහළට තබන්න.
- Align the VESA plate on the Upper Arm (A) with the mounting holes on the back of your monitor.
- Insert the appropriate screws (M-A/M-B or M-C/M-D/M-E) and washers loosely, leaving a 3-4mm gap. Avoid using power tools to prevent damage.
- Once all screws are in place, tighten them securely.
5. මෙහෙයුම් උපදෙස්
The BONTEC GDM7505 monitor arm offers full motion adjustability for optimal viewසැනසිල්ල.
Image: This diagram illustrates the extensive adjustability of the monitor arm, featuring a maximum height of 19.1 inches, a maximum extension of 23.3 inches, tilt angles from +85 to -50 degrees, swivel of +/-90 degrees, and 360-degree rotation for flexible monitor positioning.
Video: Tips for Using BONTEC Upgraded Single Monitor Mount. This video provides guidance on adjusting the tilt, swivel, and gas spring tension of the monitor arm to ensure stable and smooth movement.
5.1. ඇලවීම
If the monitor head is dropping down, you may need to tighten the tilt screw. Use the appropriate Allen key (I or J) to turn the screw clockwise until the tilt adjustment is effective and smooth.
5.2. භ්රමණ ගැලපීම
If the monitor swivels too easily or is too sensitive, tighten the swivel screw. Use the appropriate Allen key (I or J) to turn the screw clockwise until the swivel adjustment is smooth and controlled.
5.3. Tension Adjustment (Gas Spring)
The gas spring tension needs to be adjusted according to your monitor's weight to ensure the arm stays balanced and holds its position.
- Monitor Drooping? If your monitor is too heavy for the current tension and droops, turn the tension screw counterclockwise to increase tension.
- Monitor Rising? If your monitor is too light for the current tension and rises, turn the tension screw clockwise to reduce tension.
- Adjust gradually, with a maximum of 20 turns in either direction. Test the arm's balance after every few turns.
5.4. කේබල් කළමනාකරණය
To maintain a clean and organized workspace, route your cables through the integrated cable management channels on the arm. Open the cable covers, place the cables inside, and snap the covers back into place.
Image: This image highlights the integrated cable management feature, demonstrating how power and data cables can be neatly routed through the arm's channels to keep the desk organized.
6. නඩත්තු කිරීම
නිතිපතා නඩත්තු කිරීම ඔබේ මොනිටර අතෙහි ආයු කාලය සහ ප්රශස්ත ක්රියාකාරිත්වය සහතික කරයි:
- සියලුම ඉස්කුරුප්පු සහ සම්බන්ධතා තදින් සහ ආරක්ෂිත බව සහතික කිරීම සඳහා වරින් වර පරීක්ෂා කරන්න.
- Clean the surface of the monitor arm with a soft, damp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක වලින් වළකින්න.
- If the arm's movement becomes stiff or loose over time, re-adjust the gas spring tension as described in Section 5.3.
7. දෝශ නිරාකරණය
ඔබේ මොනිටර අත සමඟ ගැටළු ඇති වුවහොත්, පහත පොදු විසඳුම් වෙත යොමු වන්න:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Monitor droops or falls | ගෑස් ස්ප්රින්ග් ආතතිය මොනිටරයේ බරට වඩා අඩුය. | Increase gas spring tension by turning the adjustment screw counterclockwise (refer to Section 5.3). |
| Monitor floats up or is difficult to push down | ගෑස් ස්ප්රින්ග් ආතතිය මොනිටරයේ බරට වඩා වැඩිය. | Decrease gas spring tension by turning the adjustment screw clockwise (refer to Section 5.3). |
| Monitor tilts forward or backward too easily | ඇලවීමේ යාන්ත්රණ ඉස්කුරුප්පු ඇණ ලිහිල්යි. | Tighten the tilt adjustment screw (refer to Section 5.1). |
| Monitor swivels too freely or is too stiff | Swivel mechanism screw is loose or too tight. | Adjust the swivel adjustment screw (refer to Section 5.2). |
| Arm is unstable or wobbles | Mounting base is not securely fastened to the desk. | C-cl නැවත තද කරන්න.amp or grommet base screws (refer to Section 4.1). |
8. පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| ආදර්ශ අංකය | GDM7505 |
| තිර ප්රමාණයේ ගැළපුම | අඟල් 15-34 |
| බර ධාරිතාව | රාත්තල් 26.5 (කිලෝග්රෑම් 12) දක්වා |
| VESA අනුකූලතාව | 75x75mm, 100x100mm |
| ඇලවීමේ කෝණය | +85 ° සිට -50 ° දක්වා |
| කැරකෙන කෝණය | ±90° |
| භ්රමණය | 360° |
| උපරිම උස | අඟල් 19.1 |
| උපරිම දිගුව | අඟල් 23.3 |
| Desk Thickness (C-clamp) | අඟල් 0.39-3.15 |
| මේස ඝණකම (ග්රොමට්) | අඟල් 0.39-2.76 |
| ග්රෝමට් සිදුරු විෂ්කම්භය | අඟල් 0.39-2.36 |
| ද්රව්ය | ලෝහ |
| වර්ණය | කළු |
9. වගකීම් සහ සහාය
For warranty information or technical support, please refer to the product packaging or contact BONTEC customer service directly. Contact details can typically be found on the manufacturer's official webඅඩවිය හෝ ඔබේ මිලදී ගැනීමේ වේදිකාව හරහා.
