1. නිෂ්පාදන අවසන්view
This manual provides comprehensive instructions for the installation, operation, and maintenance of your BONTEC Full Motion TV Wall Mount, Model CT140L-FBA. This mount is designed to securely hold 26-65 inch flat and curved screens, offering extensive adjustability for optimal viewing.
ප්රධාන ලක්ෂණ ඇතුළත් වේ:
- Ultra-Long Extension: Extends from 2.9 inches to 37.4 inches from the wall.
- විශ්ව අනුකූලතාව: Supports VESA patterns from 200x200mm to 400x400mm and TVs weighing up to 77 lbs (35 kg).
- Full Motion Adjustment: Allows for +5°/-10° tilt, ±90° swivel, and ±4° leveling.
- බර වැඩ ඉදිකිරීම්: Built from reinforced steel with a three-section five-arm structure for stability.
- ඒකාබද්ධ කේබල් කළමනාකරණය: Includes cable ties to keep wires organized.
2 ආරක්ෂිත තොරතුරු
WARNING: Read all instructions carefully before installation. Incorrect assembly or installation may result in serious injury or damage.
- Ensure the mounting surface can safely support the combined weight of the mount and your TV.
- This mount is designed for installation on concrete walls, brick walls, or wooden stud walls. වියලි පවුර මත පමණක් සවි නොකරන්න.
- Always use appropriate safety equipment, such as eye protection, during installation.
- ස්ථාපන ක්රියාවලියේ කිසියම් කොටසක් පිළිබඳව ඔබට සැකයක් ඇත්නම්, සුදුසුකම් ලත් වෘත්තිකයෙකුගෙන් විමසන්න.
- ස්ථාපනය අතරතුර ළමයින් සහ සුරතල් සතුන් වැඩ කරන ප්රදේශයෙන් ඈත් කර තබන්න.
3. පැකේජ අන්තර්ගතය
Verify that all components are present before beginning installation. Refer to the included hardware bag for specific screw sizes and quantities.
සාමාන්ය පැකේජ අන්තර්ගතයට ඇතුළත් වන්නේ:
- බිත්ති තහඩු එකලස් කිරීම
- TV Bracket Arms
- Mounting Hardware (screws, anchors, washers for various TV and wall types)
- බුබුලු මට්ටම
- Cable Ties (5 pieces)
- උපදෙස් අත්පොත
4. පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| වෙළඳ නාමය | බොන්ටෙක් |
| ආදර්ශ අංකය | CT140L-FBA |
| අනුකූල රූපවාහිනී ප්රමාණ | අඟල් 26-65 |
| උපරිම බර ධාරිතාව | රාත්තල් 77 (කිලෝග්රෑම් 35) |
| VESA අනුකූලතාව | 200x200mm සිට 400x400mm දක්වා |
| බිත්තියෙන් දිගුව | අඟල් 2.9 (අත් හැරවූ) සිට අඟල් 37.4 (දිගු කළ) දක්වා |
| ඇලවීමේ කෝණය | +5° / -10° |
| කැරකෙන කෝණය | ±90° |
| මට්ටම් ගැලපීම | ±4° |
| ද්රව්ය | ශක්තිමත් කරන ලද වානේ |
| වර්ණය | කළු |
5. පිහිටුවීම සහ ස්ථාපනය
Before you begin, ensure you have the necessary tools: a drill, stud finder (for wood studs), pencil, measuring tape, and a hammer (for concrete/brick anchors). A bubble level is included with the mount.
5.1. Wall and TV Compatibility Check
Confirm your TV's VESA pattern and weight are within the mount's specifications. The mount supports VESA patterns from 200x200mm to 400x400mm and a maximum weight of 77 lbs. This mount is compatible with concrete, brick, and wooden stud walls. Do not install on drywall alone.
This image illustrates the wide compatibility of the mount with various wall types (concrete, wood stud, brick) and VESA patterns, indicating a maximum load capacity of 77 lbs. It explicitly warns against mounting on drywall alone.
5.2. ස්ථාපන පියවර
For a detailed visual guide, please watch the official installation video below.
Official BONTEC CT140L Installation Guide video. This video provides step-by-step visual instructions for mounting the TV bracket to the wall and attaching the TV.
- Configure and Assemble Monitor Plate: Depending on your TV's VESA pattern, assemble the monitor plate using the provided screws (M-A/B/C/D/E/F) and arms (E, F).
- Attach VESA Plate to the Back of Your TV: Secure the assembled VESA plate to the back of your TV using the appropriate screws (M-G/H or M-I/J/K) and washers. Ensure a snug fit.
- Secure the Wall Plate to the Wall:
- For Wooden Stud Walls: Use a stud finder to locate the center of a wooden stud. Mark the drilling points using the wall plate as a template. Drill pilot holes and secure the wall plate using the provided lag bolts and washers.
- For Brick or Concrete Walls: Mark the drilling points. Drill holes using a masonry drill bit. Insert the concrete anchors flush with the wall. Secure the wall plate using the provided lag bolts and washers. Avoid drilling into mortar lines between bricks.
- Hang the TV onto the Wall Plate: Carefully lift your TV with the attached VESA plate and hook it onto the wall plate. Secure the TV to the mount using the safety screws or locking mechanism.
6. මෙහෙයුම් උපදෙස්
Your BONTEC Full Motion TV Wall Mount offers versatile adjustments for optimal viewවිවිධ තනතුරු වලින්.
6.1. Adjusting Tilt, Swivel, and Level
- ඇලවීම: The mount allows for a tilt range of +5° (upward) to -10° (downward). Use the tool-free tilt mechanism to adjust the vertical viewing කෝණය.
- කරකැවීම: The articulating arm allows for a ±90° swivel, enabling you to turn your TV left or right to suit your viewතනතුර.
- මට්ටම: If your TV is not perfectly level after installation, you can adjust it by ±4° using the leveling screws on the TV plate.
This image demonstrates the tilt (+5°/-10°) and level (±4°) adjustment features of the full motion TV mount, allowing for flexible screen positioning.
This image illustrates the ±90° swivel function of the mount, highlighting its ability to provide optimal viewing angles from various locations within a room.
6.2. කේබල් කළමනාකරණය
Use the included cable ties to route and secure your TV cables along the articulating arms. This helps maintain a tidy appearance and prevents cables from getting tangled or damaged during adjustments.
This image highlights key design elements of the mount, including the tool-free tilt mechanism, heavy-duty square tube construction, integrated Velcro cable organizer, and smooth brass washers for fluid movement.
Official BONTEC CT140L Product Showcase video. This video demonstrates the various features and movements of the TV wall mount, including extension, swivel, and cable management.
7. නඩත්තු කිරීම
නිතිපතා නඩත්තු කිරීම ඔබේ රූපවාහිනී බිත්ති සවිකිරීමේ ආයු කාලය සහ ආරක්ෂිත ක්රියාකාරිත්වය සහතික කරයි.
- පිරිසිදු කිරීම: දූවිලි ඉවත් කිරීම සඳහා මෘදු වියළි රෙද්දකින් සවි කිරීම පිස දමන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා කිරීමෙන් වළකින්න.
- වරින් වර පරීක්ෂා කිරීම්: Annually, check all screws and bolts to ensure they are securely tightened. Over time, vibrations or frequent adjustments can cause fasteners to loosen.
- ලිහිසි තෙල්: The mount features smooth brass washers for durable adjustments. No additional lubrication is typically required.
8. දෝශ නිරාකරණය
If you encounter any issues with your BONTEC TV Wall Mount, refer to the following common problems and solutions:
| ගැටලුව | හැකි විසඳුම |
|---|---|
| ස්ථාපනය කිරීමෙන් පසු රූපවාහිනිය සමතලා නොවේ. | Use the ±4° level adjustment feature on the TV plate to correct the angle. |
| කන්ද ලිහිල් හෝ අස්ථායී බවක් දැනේ. | Re-check all wall mounting bolts and TV attachment screws to ensure they are securely tightened. Verify the wall type is appropriate for installation. |
| ඇලවීම හෝ කරකැවීම සකස් කිරීමේ අපහසුතාව. | Ensure no cables are obstructing movement. Check for any debris in the joints. The mount is designed for smooth movement; excessive force should not be necessary. |
| නැතිවූ කොටස්. | Contact BONTEC customer support for assistance. |
9. වගකීම් සහ සහාය
Your BONTEC TV Wall Mount is covered by a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official BONTEC webසවිස්තරාත්මක වගකීම් නියමයන් සහ කොන්දේසි සඳහා අඩවිය.
For technical support, replacement parts, or any questions regarding your product, please contact BONTEC customer service through their official channels. Contact information can typically be found on the product packaging or the BONTEC webඅඩවිය.
