හැඳින්වීම
This manual provides detailed instructions for the installation, operation, and maintenance of your diymore 8-100V Battery Meter. This device is designed to accurately monitor the voltage, capacity, and temperature of various battery types, including ternary lithium, iron lithium, and lead-acid batteries, within an 8-100V range. It features a clear LCD display, automatic calibration, power-off memory, and voltage alarm reminders for enhanced safety and convenience.
නිෂ්පාදන විශේෂාංග
- පුළුල් බැටරි අනුකූලතාව: Supports 3-22 series lithium batteries, 3-26 series iron lithium batteries, and 12V, 24V, 36V, 48V, 60V, 72V, 84V lead-acid batteries. Also supports custom voltage settings in the 8-100V range.
- ඉහළ සහ අඩු පරිමාවtagඊ අනතුරු ඇඟවීම: Activates an alarm when battery energy is below 10% or above 100% (overcharge/over-discharge).
- පැහැදිලි LCD සංදර්ශකය: Simultaneously shows battery voltage, remaining capacity, and temperature.
- සකස් කළ හැකි පසුතල ආලෝකය: Configurable backlight brightness and duration.
- High Accuracy & Low Power Consumption: Utilizes a precise measurement algorithm and intelligent SOC algorithm for accurate data. Operating current is less than 20mA, and less than 2mA in power-saving mode.
- Power-Off මතකය: බලය ඇනහිටීමෙන් පසු සැකසුම් රඳවා ගනී.
- ස්වයංක්රීය ක්රමාංකනය: Ensures consistent accuracy.
- බහුකාර්ය යෙදුම්: Suitable for computer rooms, RVs, electric vehicles, energy storage devices, and more.
පිරිවිතර
| පිරිවිතර | වටිනාකම |
|---|---|
| නිෂ්පාදකයා | diymore |
| නිෂ්පාදන මාදිලි අංකය | B0FNJ5C171 |
| නිෂ්පාදන බර | 50 ග්රෑම් |
| නිෂ්පාදන මානයන් (L x W x H) | 6.8 x 3.9 x 1.5 සෙ.මී |
| ද්රව්ය | ඇක්රිලෝනයිට්රයිල් බියුඩඩීන් ස්ටයිරීන් (ABS) |
| බලශක්ති ප්රභවය | බැටරි |
| මිනුම් නිරවද්යතාව | +/-0.5% |
| IP ශ්රේණිගත කිරීම | IP 67 |
| අවම මෙහෙයුම් වෙළුමtage | 8 Volts (DC) |
| වෙළුමtagඊ පරාසය | DC 8-100V |
| හඳුනාගැනීමේ උෂ්ණත්ව පරාසය | -20 සිට 80 ° C |
| විභේදනය | 0.01V |
| මෙහෙයුම් ධාරාව | ≤20mA |
සැකසුම සහ ස්ථාපනය
The diymore battery meter is designed for straightforward installation. Ensure the power source is disconnected before proceeding with any wiring.
රැහැන් උපදෙස්:
- Identify the positive (+) and negative (-) terminals of your battery or power system.
- Connect the red wire from the battery meter to the positive (+) terminal of your battery.
- Connect the black wire from the battery meter to the negative (-) terminal of your battery.
- කෙටි පරිපථ වැළැක්වීම සඳහා සියලුම සම්බන්ධතා ආරක්ෂිතව සහ නිසි ලෙස පරිවරණය කර ඇති බවට සහතික වන්න.
ආරම්භක වින්යාසය:
After connecting the meter, it will power on. You will need to configure the battery type and series count to ensure accurate readings. Refer to the 'Operating Instructions' section for details on navigating the settings menu.
මෙහෙයුම් උපදෙස්
The diymore battery meter features a user-friendly interface with multiple operating modes and settings.
Display Interpretation:
The LCD screen simultaneously displays:
- බැටරි වෙළුමtage: වත්මන් වෙළුමtagසම්බන්ධිත බැටරියේ ඊ.
- Remaining Capacity: ප්රතිශතයtagඉතුරු බැටරි ආරෝපණය.
- උෂ්ණත්වය: Real-time ambient temperature (if sensor is active).
Mode Selection and Settings:
The meter offers six primary modes for configuration:
- Ternary Lithium Battery Settings (L-): Configure for ternary lithium batteries by selecting the number of series (e.g., L-03 for 3 series).
- Iron Lithium Battery Settings (F-): Configure for iron lithium batteries by selecting the number of series (e.g., F-03 for 3 series).
- Lead Acid Battery Settings (P-): Configure for lead-acid batteries by selecting the nominal voltage (e.g., P-12 for 12V).
- අභිරුචි වෙළුමtage Settings (C-): Allows manual input of voltage range for specific battery types not covered by presets.
- Backlight Settings (bL): Adjust backlight brightness and duration.
- ඉහළ සහ අඩු පරිමාවtage Alarm Settings (AL): Set the thresholds for overcharge and over-discharge alarms.
Use the button on the side of the meter to cycle through modes and adjust settings. Long press the button to enter setting mode, short press to change values, and long press again to save and exit.
අනතුරු ඇඟවීමේ ක්රියාකාරිත්වය:
The meter provides visual and potentially audible alarms for critical battery states.
When the battery capacity exceeds 100% (overcharge) or drops below 10% (over-discharge), the meter will display a warning and activate an alarm to alert the user.
නඩත්තු කිරීම
To ensure the longevity and accurate performance of your diymore battery meter, follow these maintenance guidelines:
- පිරිසිදු කිරීම: සංදර්ශකය පිස දමා casing with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the screen or plastic.
- පාරිසරික තත්ත්වයන්: Store and operate the meter within its specified temperature range (-20 to 80°C). Avoid exposure to extreme temperatures, direct sunlight for prolonged periods, and high humidity.
- ජල ප්රතිරෝධය: The meter has an IP67 rating, meaning it is protected against dust and temporary immersion in water. However, it is not designed for continuous underwater use. Ensure the connections are dry before operation.
- සම්බන්ධතා අඛණ්ඩතාව: රැහැන් සම්බන්ධතා ආරක්ෂිත සහ විඛාදනයෙන් තොර බව සහතික කිරීම සඳහා වරින් වර පරීක්ෂා කරන්න.
දෝෂගවේෂණය
If you encounter issues with your diymore battery meter, refer to the following common problems and solutions:
- සංදර්ශකය නැත:
- Check power connections: Ensure the red and black wires are correctly and securely connected to the battery terminals.
- බැටරි පරිමාව තහවුරු කරන්නtage: බැටරි පරිමාව තහවුරු කරන්නtage is within the meter's operating range (8-100V DC).
- වැරදි කියවීම්:
- Incorrect battery type/series setting: Ensure the meter is configured for the correct battery type (Ternary Lithium, Iron Lithium, Lead Acid) and the correct number of series or voltage. Refer to 'Operating Instructions'.
- Recalibration: The meter features automatic calibration, but if readings seem consistently off, re-check settings.
- Alarm Not Functioning:
- Check alarm settings: Verify that the high and low voltage alarm thresholds are set correctly in the 'AL' mode.
- Battery state: Ensure the battery's charge level is actually outside the set thresholds to trigger the alarm.
- සංදර්ශක දැල්වීම:
- Unstable power supply: Check for loose connections or fluctuations in the battery voltage.
If problems persist after attempting these troubleshooting steps, please contact diymore customer support for further assistance.
වගකීම් සහ සහාය
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official diymore website. Keep your proof of purchase for any warranty claims. If you require assistance, please contact the seller or manufacturer directly.
