හැඳින්වීම
Thank you for choosing the Bellemave Triple Bunk Bed. This instruction manual provides essential information for the safe assembly, operation, and maintenance of your new bunk bed. Please read this manual thoroughly before assembly and retain it for future reference. This metal bunk bed is designed for versatility, offering a twin over twin configuration that can also be separated into three individual twin beds.
ආරක්ෂිත තොරතුරු
අවවාදයයි: මෙම අනතුරු ඇඟවීම් සහ උපදෙස් පිළිපැදීමට අපොහොසත් වීමෙන් බරපතල තුවාල හෝ මරණය සිදුවිය හැකිය.
- Always assemble the bunk bed according to the provided instructions to ensure structural stability.
- උපරිම බර ධාරිතාව ඉක්මවා නොයන්න: 400 lbs for the upper bed සහ 450 lbs for each bottom bed.
- The upper bunk is not suitable for children under six years of age.
- Use the guardrails to prevent falls. Ensure guardrails are properly installed and secured at all times.
- Be aware of the risk of falling from a significant height when using the upper bunk.
- Ensure the mattress used on the upper bunk does not exceed 6 inches in thickness and is at least 5 inches below the top of the guardrail.
- Periodically check and ensure that all connectors are tight.
- Do not allow horseplay on or under the bed.
- ඉහළ තට්ටුවට ඇතුළු වීමට සහ පිටවීමට සෑම විටම ඉණිමඟ භාවිතා කරන්න.
- ඉහළ බංකුවේ සිටින එක් පුද්ගලයෙකුට වඩා තහනම් කරන්න.
පැකේජයේ අන්තර්ගතය
Before beginning assembly, verify that all parts are present and undamaged. Refer to the parts list included in your packaging. If any parts are missing or damaged, do not proceed with assembly and contact customer support immediately.
- Metal frame components for three twin beds.
- Guardrails for the upper bunk.
- Integrated ladder.
- Metal slats for mattress support.
- All necessary hardware (screws, bolts, nuts, washers).
- එකලස් කිරීමේ මෙවලම් (උදා: ඇලන් යතුර).
- උපදෙස් අත්පොත.
Setup / Assembly Instructions
Assembly is required for this triple bunk bed. It is recommended that two adults assemble this product. Each part is numbered for straightforward assembly. All necessary tools are included.
පියවර 1: සංරචක ඉවත් කර හඳුනා ගන්න
Carefully unpack all components from the boxes. Lay them out on a clean, soft surface (like a carpet) to prevent scratches. Identify each part using the provided parts list and ensure all hardware is present.
Step 2: Assemble the Base Frames
Begin by assembling the base frames for the two lower twin beds. Connect the side rails to the headboards and footboards using the provided bolts and nuts. Do not fully tighten bolts until all components are loosely assembled.
රූපය: සමීප රූපය view of the sturdy metal frame connection points, illustrating how the bed components are joined together with bolts for stability.
පියවර 3: ඇඳ පුවරු සවි කරන්න
Once the base frames are assembled, insert the metal slats into the designated slots or attach them to the support rails. These slats provide crucial support for your mattress and eliminate the need for a box spring.
රූපය: ගුවන් යානයක් view of the assembled metal bed frame, showcasing the integrated metal slats that provide robust mattress support.
Step 4: Assemble the Upper Bunk Frame
Assemble the frame for the upper bunk, similar to the lower beds. Attach the guardrails to the upper bunk frame. Ensure the guardrails are securely fastened as they are critical safety components.
Image: Detail of the upper bunk, highlighting the secure attachment of the full-length guardrails and the integrated ladder for safe access.
Step 5: Attach Upper Bunk to Lower Frames
Carefully lift the assembled upper bunk frame and attach it to the designated connection points on the lower bed frames. Secure all connections with the provided hardware. Ensure the ladder is also firmly attached.
Image: The complete Bellemave Triple Bunk Bed assembly, showcasing the twin over twin configuration with an additional twin bed at the side.
පියවර 6: අවසාන තද කිරීම
Once all components are in place and loosely assembled, go back and fully tighten all bolts and screws. Do not overtighten. Ensure the bed is stable and level before use.
මෙහෙයුම් උපදෙස්
Standard Triple Bunk Configuration
In its standard configuration, the bed features a twin over twin bunk with an additional twin bed positioned alongside the lower bunk. This setup is ideal for maximizing sleeping space in compact rooms.
Image: The Bellemave Triple Bunk Bed arranged in a room, demonstrating its space-saving design with three twin beds.
Converting to Three Individual Twin Beds
The Bellemave Triple Bunk Bed can be separated into three individual twin-size beds. To convert, carefully disassemble the upper bunk from the lower frames. Then, separate the two lower twin beds. Ensure all connecting hardware is removed and stored safely. This conversion allows for flexible room arrangements as needs change.
Image: The three components of the Bellemave Triple Bunk Bed configured as separate twin beds, illustrating its convertible design.
බර ධාරිතාව
- Upper Bunk: Maximum 400 lbs.
- Each Lower Bunk: Maximum 450 lbs.
නඩත්තු කිරීම
- පිරිසිදු කිරීම: ලෝහ රාමුව මෘදු, d රෙදි කඩකින් පිස දමන්න.amp රෙදි. නිමාවට හානි කළ හැකි උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ රළු රසායනික ද්රව්ය වලින් වළකින්න.
- දෘඩාංග පරීක්ෂාව: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and connections to ensure they remain tight. Retighten if necessary to maintain stability and safety.
- ව්යුහාත්මක අඛණ්ඩතාව: Regularly check the bed frame for any signs of damage, bending, or stress. If any damage is observed, discontinue use and contact customer support.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ඇඳ සෙලවෙන හෝ අස්ථායී බවක් දැනේ. | ලිහිල් දෘඪාංග සම්බන්ධතා. | සියලුම බෝල්ට් සහ ඉස්කුරුප්පු පරීක්ෂා කර තද කරන්න. ඇඳ සමතලා මතුපිටක ඇති බවට වග බලා ගන්න. |
| භාවිතයේදී ඝෝෂාකාරී ශබ්ද. | ලෝහ කොටස් අතර ලිහිල් සම්බන්ධතා හෝ ඝර්ෂණය. | සියලුම දෘඩාංග තද කරන්න. මිරිකීම දිගටම පවතී නම්, සම්බන්ධතා ස්ථානවලට සිලිකොන් ලිහිසි තෙල් කුඩා ප්රමාණයක් යොදන්න. |
| කොටස් එකලස් කිරීමේ අපහසුතාව. | Incorrect orientation of parts or missing hardware. | Refer to the assembly instructions carefully. Ensure parts are oriented correctly. Verify all hardware is present. Do not force parts. |
| Mattress sags through slats. | Incorrect mattress size or damaged slats. | Ensure mattress is the correct twin size. Inspect slats for damage; contact support if damaged. |
පිරිවිතර
Image: A technical diagram illustrating the precise dimensions of the Bellemave Triple Bunk Bed in both centimeters and inches.
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | FST00213-T-BB1 |
| නිෂ්පාදන මානයන් (L x W x H) | 83"අඟල් x 78"අඟල් x 72.8"උ |
| ද්රව්ය | ලෝහ |
| වර්ණය | කළු |
| අවසන් වර්ගය | ලැකර් |
| ආකෘති සාධකය | Triple Bunk Bed (Convertible) |
| අනුකූල මෙට්ට ප්රමාණය | නිවුන් |
| ඉහළ ඇඳ බර ධාරිතාව | රාත්තල් 400 |
| Lower Bed Weight Capacity (each) | රාත්තල් 450 |
| විශේෂ ලක්ෂණය | No Box Spring Needed (Metal Slats Included) |
| එකලස් කිරීම අවශ්ය වේ | ඔව් |
| අයිතමයේ බර | රාත්තල් 60 කි |
වගකීම් තොරතුරු
Bellemave products are manufactured with quality and durability in mind. For specific warranty details regarding your Triple Bunk Bed, please refer to the warranty card included with your purchase or contact Bellemave customer support. Keep your proof of purchase for any warranty claims.
පාරිභෝගික සහාය
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Bellemave customer support. For the most up-to-date contact information, please visit the official Bellemave webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔබේ නිෂ්පාදන ඇසුරුම්වල සපයා ඇති සම්බන්ධතා තොරතුරු වෙත යොමු වන්න.
ඔබට ද නැරඹිය හැකිය Bellemave Store on Amazon වැඩි විස්තර සඳහා.
