OKIBB DL-08 Fingerprint Smart Door Lock Instruction Manual

1. හැඳින්වීම

Thank you for choosing the OKIBB DL-08 Fingerprint Smart Door Lock. This manual provides detailed instructions for installation, setup, operation, and maintenance to ensure optimal performance and security. This smart lock offers multiple unlocking methods and seamless integration with your home Wi-Fi network for enhanced convenience and control.

2. පැකේජ අන්තර්ගතය

ස්ථාපනය ආරම්භ කිරීමට පෙර, කරුණාකර සියලුම සංරචක පැකේජයේ ඇති බව තහවුරු කරගන්න:

• Fingerprint Smart Lock (Doesn't come with handle)
• ස්ථාපන උපදෙස් අත්පොත
• Programming Quick Set Up Guide
• සවිකරන තහඩුව
• සිදුරු විවෘත කිරීමේ රූප සටහන
• ඉස්කුරුප්පු (විවිධ ප්‍රමාණ)
• අගුල
• වැඩ වර්ජන තහඩුව
• 5 භෞතික යතුරු
• 2 FOB Cards

රූපය: අවසන්view of the OKIBB DL-08 Smart Door Lock package contents, showing the exterior and interior lock units, physical keys, key fobs, and various installation components.

3. ස්ථාපන මාර්ගෝපදේශය

The OKIBB DL-08 Smart Door Lock is designed for easy DIY installation, typically taking about 15 minutes with a Phillips screwdriver. Ensure your door meets the specified dimensions for compatibility (door thickness 1-3/8" to 2" (35mm to 50mm), backset 2-3/8" or 2-3/4" (60mm or 70mm), latch hole 1" (25mm), hole diameter 1-1/2" or 2-1/8" (38mm or 54mm)).

3.1 දොර සූදානම් කරන්න

• Use the provided hole opening diagram to mark and drill holes if your door is not pre-drilled.
• Ensure the latch hole is chiseled for a flush fit.

Image: Detailed diagram illustrating compatible door types, dimensions, and hole requirements for the OKIBB DL-08 Smart Door Lock. It highlights measurements for door thickness, backset, latch hole, and hole diameter.

3.2 ඩෙඩ්බෝල්ට් ලැච් එක ස්ථාපනය කරන්න

• Insert the deadbolt latch into the door edge. Ensure the "UP" marking on the latch is facing upwards and aligned vertically with the keyhole.
• Secure the latch with two short screws.

Image: A hand installing the deadbolt latch into the door's pre-drilled hole, ensuring correct orientation and securing it with screws.

3.3 Install the Exterior Unit

• Thread the power cord from the exterior unit through the door hole first.
• Ensure the metal strip on the exterior unit is upright and vertically aligned with the lock cylinder.
• Insert the exterior unit into the door, ensuring the metal strip passes through the hole in the deadbolt latch.

Image: The exterior unit of the smart lock being positioned and inserted into the door, with the power cord and metal strip correctly routed.

3.4 Install the Mounting Plate and Interior Unit

• Place the mounting plate on the interior side of the door, aligning it with the exterior unit.
• Secure the mounting plate with two long screws, ensuring the exterior unit is held firmly.
• Connect the power cord from the exterior unit to the interior unit's circuit board. Ensure the arrow on the interior unit's spindle remains vertical.
• Attach the interior unit to the mounting plate and secure it with a short screw at the bottom.

Image: Step-by-step installation of the interior smart lock unit, showing the mounting plate, cable connection, and securing the unit to the door.

3.5 බැටරි ඇතුළු කරන්න

• අභ්යන්තර ඒකකයේ බැටරි ආවරණය විවෘත කරන්න.
• ධ්‍රැවීයතා සලකුණු අනුව AA බැටරි 4ක් (ඇතුළත් කර නැත) ඇතුළු කරන්න.
• Close the battery cover. The lock will perform an initial test.

Image: A hand inserting AA batteries into the battery compartment of the interior smart lock unit.

3.6 ස්ථාපන වීඩියෝ

4. මූලික සැකසුම සහ වින්‍යාසය

After physical installation, proceed with the electronic setup and configuration of your smart lock.

4.1 First-Time Activation & Administrator Setup

• Press 1# on the smart lock touchscreen to activate the menu mode.
• Enter the default administrator passcode (123456# for first-time setup).
• Follow voice prompts to set and confirm your new administrator password.

4.2 Wi-Fi සම්බන්ධතාවය

Connect your smart lock to your home Wi-Fi network for remote control and notifications.

• Open the "Smart Life" app on your smartphone.
• In the app, press "+" to add a device, then select "Smart Lock Device".
• On the lock, enter your administrator password, then press 1# for Administrator Setting, then 3# for Wi-Fi Connection.
• Follow the app's instructions to connect the lock to your 2.4GHz Wi-Fi network (5GHz networks are not supported).

4.3 Adding User Passwords and Fingerprints

You can add up to 200 unique users, including fingerprints and user codes.

• On the lock, enter your administrator password, then press 1# for Administrator Setting, then 2# for General User Setting.
• Press 1# to add a common user.
• Follow the voice prompts to add a new fingerprint or user password. For fingerprints, place your finger on the scanner multiple times until successfully registered.

4.4 Auto-Lock Setting

Customize the auto-lock delay for added security.

• On the lock, enter your administrator password, then press 1# for Administrator Setting, then 3# for System Setting.
• Press 5# for Auto-Lock settings.
• Select the desired auto-lock duration (e.g., 5s, 10s, 15s, 30s, 60s).

4.5 Volume Control Setting

Adjust the lock's voice prompt volume.

• On the lock, enter your administrator password, then press 1# for Administrator Setting, then 3# for System Setting.
• Press 1# for Volume Adjustment.
• Select the desired volume level (Low, Medium, High, or Mute).

4.6 කර්මාන්තශාලා සැකසුම් ප්‍රතිසාධනය කරන්න

To reset the lock to its original factory settings, deleting all user data.

• On the lock, enter your administrator password, then press 1# for Administrator Setting, then 3# for System Setting.
• Press 4# to restore factory settings.
• Confirm the reset by pressing #.

5. මෙහෙයුම් උපදෙස්

The OKIBB DL-08 Smart Door Lock offers five convenient ways to unlock your door:

• ඇඟිලි සලකුණු: Place your registered finger on the fingerprint scanner. The lock will unlock in under 0.5 seconds.
• මුර කේතය: Enter your registered passcode on the touchscreen keypad, followed by #.
• යෙදුම් පාලනය: Use the Smart Life app to remotely unlock the door from anywhere with an internet connection.
• Key Fob: Tap the provided key fob card against the lock's sensor.
• භෞතික යතුර: Use one of the provided physical keys as a traditional backup.

Image: Visual representation of the five unlocking methods: App Control, Fingerprint, IC Card (Key Fob), PIN Code, and Mechanical Key.

5.1 One-Touch Locking

To lock the door from the outside, simply press the lock button on the keypad. From the inside, turn the thumb-turn knob.

5.2 එබී බැලීම වැළැක්වීමේ මුරපදය

When entering your passcode, you can input random digits before and after your actual code to prevent others from guessing your entry sequence. For example, XXX + Passcode + XXX + #.

Image: A diagram explaining the Anti-Peeping Password feature, where random digits can be added before and after the correct password to obscure it from onlookers.

5.3 Duress Code/Fingerprint

In emergency situations, using a pre-set duress code or fingerprint will unlock the door and simultaneously send an instant alert to the administrator's app, providing silent safety during security threats.

Image: Visual explanation of the Duress Code and Duress Fingerprint, showing how they trigger an alert to the administrator's phone while unlocking the door.

6 ප්රධාන ලක්ෂණ

• True Hub-Free Wi-Fi: Connects directly to your home Wi-Fi (2.4GHz) without an additional hub.
• 5-in-1 යතුරු රහිත ඇතුල්වීම: Offers fingerprint, keypad, remote app control, tap-to-open fob card, and physical key unlocking methods.
• Smart Auto-Lock: Customizable auto-lock delay from 5 to 60 seconds.
• එක්-ස්පර්ශ අගුලු දැමීම: Instant locking from both interior and exterior panels.
• Remote Access & Alerts: Receive real-time alerts for all lock/unlock events and doorbell rings via the app.
• පරිශීලක කළමනාකරණය: Grant unique, temporary, or recurring passcodes and manage up to 200 users via the app.
• සියලු කාලගුණ විශ්වසනීයත්වය: IP54 weatherproof rating and extreme temperature tolerance (-4°F to 158°F).
• Assured Security: Backed by ANSI Grade 3 certification.
• දිගු බැටරි ආයු කාලය: Smart power-saving design provides up to 6 months of battery life.
• හදිසි බලය: USB-C emergency port for power bank access if batteries run low.

7. නඩත්තු කිරීම

7.1 බැටරි ප්රතිස්ථාපනය

The lock will provide proactive low-battery alerts via the app and on the lock itself. Replace all 4 AA batteries when alerted to ensure continuous operation.

Image: A smartphone displaying a low battery alert from the Smart Life app, next to the smart lock with a USB-C cable connected for emergency power.

7.2 පිරිසිදු කිරීම

Wipe the touchscreen keypad and fingerprint sensor with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.

8. දෝශ නිරාකරණය

If you encounter any issues, please refer to the following common problems or consult the full app user manual for detailed solutions.

• අගුල ප්‍රතිචාර නොදක්වයි: Check battery levels. Use the USB-C emergency power port if batteries are completely drained.
• ඇඟිලි සලකුණ හඳුනා නොගත්: ඔබේ ඇඟිල්ල පිරිසිදුව හා වියලිව ඇති බවට වග බලා ගන්න. ගැටළු දිගටම පවතී නම් ඔබේ ඇඟිලි සලකුණ නැවත ලියාපදිංචි කරන්න.
• Wi-Fi සම්බන්ධතා ගැටළු: Ensure your router is set to 2.4GHz. Check Wi-Fi signal strength at the door.
• Forgot passcode: Use the app to generate a temporary password or reset your user password.

9. පිරිවිතර

10. වගකීම් සහ සහාය

The OKIBB DL-08 Fingerprint Smart Door Lock comes with a වසර 3ක වගකීමක් covering lock, circuit, and keypad issues. For any installation, app, or password problems, 24/7 ඊමේල් සහාය is available. Please refer to your product documentation for contact details or visit the official OKIBB webඋදව් සඳහා අඩවිය.