1. හැඳින්වීම
Thank you for choosing the KGUSS FX-AUDIO- L06 Fully Balanced Power Amplifier. This device is designed to deliver high-fidelity audio performance with its advanced Class D amplification and balanced circuit architecture. Please read this manual thoroughly before operating the amplifier to ensure proper setup, optimal performance, and safe use.
රූපය 1: ඉදිරිපස view of the KGUSS FX-AUDIO- L06 Fully Balanced Power Ampලිෆයර්, ප්රදර්ශනයasing the VU meters and control knob.
2. ආරක්ෂිත උපදෙස්
- Do not expose this device to rain, moisture, or extreme temperatures.
- අවට නිසි වාතාශ්රය සහතික කරන්න ampඅධික උනුසුම් වීම වැළැක්වීම සඳහා ලයිෆයර්.
- විවෘත නොකරන්න ampලිෆයර් සීasing. සියලුම සේවා සුදුසුකම් ලත් පුද්ගලයින් වෙත යොමු කරන්න.
- Use only the specified power adapter or a compatible power supply that meets the voltagඊ සහ වත්මන් අවශ්යතා.
- Disconnect the power supply before making any connections or disconnections.
- උපාංගය ශක්තිමත් චුම්බක ක්ෂේත්ර වලින් ඈත් කරන්න.
3. පැකේජ අන්තර්ගතය
කරුණාකර පහත අයිතම සඳහා පැකේජය පරීක්ෂා කරන්න:
- 1 x KGUSS FX-AUDIO- L06 Ampජීවිතාරක්ෂකයා
- 1 x Power Adapter (standard)
- 1 x පරිශීලක අත්පොත
4. නිෂ්පාදන අවසන්view
4.1 ඉදිරිපස පුවරුව
රූපය 2: Front and Rear Panel Layout with corresponding descriptions.
- ON/SEL Button: Press and hold to power on/off. Short press to switch audio sources (UNBAL/BAL).
- Level Indicator Meter (VU Meter): Displays the audio output level for the left (L) and right (R) channels.
- LED Indicator for Line Input: Illuminates when the unbalanced (RCA) input is selected.
- LED Indicator for XLR Input: Illuminates when the balanced (XLR) input is selected.
- වෙළුම් බොත්තම: ශබ්දය අඩු කිරීමට වමට හැරෙන්න, ශබ්දය වැඩි කිරීමට දකුණට හැරෙන්න.
4.2 පසුපස පුවරුව
- Balanced XLR Signal Input (L/R): For connecting audio sources with balanced XLR outputs.
- Single-ended RCA Input (L/R): For connecting audio sources with unbalanced RCA outputs.
- 12V ප්රේරක ප්රතිදානය: For controlling other devices with a 12V trigger input.
- 12V ප්රේරක ආදානය: For receiving a 12V trigger signal from another device.
- Straight-through Mode Switch (DIAL ON): When set to ON, the signal passes through without volume control, allowing an external preamplifier to manage volume.
- Meter Head Swing Switch (DIAL ON): When set to ON, the VU meters will swing. When set to OFF, the meters will be static.
- R/L Speaker Output: Connects to passive speakers (2Ω-8Ω).
- High Power DC Power Interface: Supports rated current 15A input. Requires a GX20-4 pin aviation power connector for maximum output (600W+600W).
- Conventional DC Power Interface: Supports rated current 4A input. For routine use with standard power sources.
5. සැකසුම් උපදෙස්
5.1 සම්බන්ධක ස්පීකර
Connect your passive speakers to the R/L Speaker Output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for each speaker. The L06 supports speakers with an impedance of 2Ω to 8Ω.
5.2 ශ්රව්ය මූලාශ්ර සම්බන්ධ කිරීම
The L06 offers both balanced (XLR) and unbalanced (RCA) inputs. Choose the appropriate input based on your audio source device.
- XLR ආදානය: Use XLR cables to connect your audio source (e.g., DAC, preamplifier) to the Balanced XLR Signal Input (L/R) on the rear panel.
- RCA ආදානය: Use RCA cables to connect your audio source (e.g., CD player, TV BOX, smartphone) to the Single-ended RCA Input (L/R) on the rear panel.
රූපය 3: Diagram illustrating various device connections and input/output wiring for the L06 ampජීවිතාරක්ෂකයා.
5.3 බල සම්බන්ධතාවය
Connect the provided power adapter to the Conventional DC Power Interface (14) on the rear panel. For high-power applications requiring up to 500W+500W output, use a compatible 15A power supply with a GX20-4 pin aviation connector and connect it to the High Power DC Power Interface (13).
6. මෙහෙයුම් උපදෙස්
6.1 බල ගැන්වීම සක්රිය / අක්රිය කිරීම
ඔබා අල්ලාගෙන සිටින්න ON/SEL button (1) on the front panel for a few seconds to power the ampජීවිත කාලය ක්රියාත්මක කිරීම හෝ අක්රිය කිරීම.
6.2 ආදාන තේරීම
බලගැන්වීමෙන් පසු, කෙටි ඔබන්න ON/SEL button (1) to cycle between the balanced (XLR) and unbalanced (RCA) inputs. The corresponding LED indicator (3 or 4) will illuminate to show the active input.
6.3 වෙළුම් පාලනය
Adjust the audio output level using the වෙළුම නොබ් (5). Turn clockwise to increase volume and counter-clockwise to decrease volume.
6.4 VU Meter Operation
ද Level Indicator Meters (VU Meters) (2) provide a visual representation of the audio signal level. Ensure the Meter Head Swing Switch (11) on the rear panel is set to 'ON' for the meters to function. If the 'Straight-through Mode Switch' (10) is 'ON', the volume knob will be bypassed, and the VU meters will reflect the input signal level without volume attenuation from the L06.
7 ප්රධාන ලක්ෂණ
- අධි බල ප්රතිදානය: Features dual TPA3255 Class D amplifier chips, delivering up to 500W + 500W into 2Ω speakers.
- Ultra-low Distortion: Utilizes TI ultra-low distortion chipset and OPA1612 operational amplifier, achieving THD <0.007% and SNR >120dB.
- Fully Balanced Circuit Design: Supports selectable balanced (XLR) and single-ended (RCA) inputs, effectively reducing interference and improving signal clarity.
- Dual Power Input Modes: Accommodates both standard power sources and high-power configurations (up to 600W+600W with a GX20-4 pin aviation power connector) for versatile use.
- ආරක්ෂණ පරිපථය: Incorporates multifunctional protection circuits for enhanced device longevity and safety.
- Relay Channel Switching: Ensures smooth and reliable input source switching.
රූපය 4: Visual representation of the L06's core features, including chipset, inductor, and protection.
8. නඩත්තු කිරීම
- පිරිසිදු කරන්න amplifier's exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Ensure the ventilation slots are free from dust and obstructions to maintain proper airflow.
- දිගු කාලයක් භාවිතයේ නොමැති විට උපාංගය සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
9. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| බලය නැත | Power cable not connected; Power outlet faulty; Ampජීවිත කාලය ඉවතට. | Check power cable connection; Try a different outlet; Press and hold ON/SEL button to power on. |
| ශබ්ද ප්රතිදානයක් නොමැත | Incorrect input selected; Volume too low; Speaker cables loose; Audio source issue. | Short press ON/SEL to select correct input; Increase volume; Check speaker connections; Verify audio source is working. |
| විකෘති ශබ්දය | Volume too high; Input signal too strong; Speaker impedance mismatch. | Reduce volume; Check audio source output level; Ensure speakers are within 2Ω-8Ω range. |
| VU මීටර චලනය නොවේ | Meter Head Swing Switch is OFF; No audio signal. | Set Meter Head Swing Switch (11) to ON; Ensure audio is playing and input is selected. |
10. පිරිවිතර
| පරාමිතිය | වටිනාකම |
|---|---|
| වෙළඳ නාමය | FX-AUDIO- |
| ආකෘතිය | L06 |
| චිප්සෙට් | OPA1612+TPA3255 |
| යෙදවුම් | XLR / Line in (RCA) |
| ප්රතිදාන | Speaker L/R |
| සංඛ්යාත ප්රතිචාරය | (10Hz - 24kHz) ±0.3dB |
| එස්.එන්.ආර් | 120dB |
| THD+N | <0.007% (1KHz, A-wt) |
| Power Output (THD+N<1%) | 100W+100W@8Ω 170W+170W@4Ω 300W+300W@2Ω |
| Power Output (THD+N<10%) | 150W+150W@8Ω 300W+300W@4Ω 500W+500W@2Ω |
| නිවාස ද්රව්ය | ඇලුමිනියම් මිශ්ර ලෝහය |
| පෙනුම | Sandblasting oxidation |
| නිෂ්පාදන බර | ග්රෑම් 1440 (ආසන්න වශයෙන් රාත්තල් 3.17) |
| නිෂ්පාදන ප්රමාණය (L*W*H) | 200mm * 178mm * 45mm (approx. 7.87 x 7.01 x 1.77 inches) |
11. වගකීම් සහ සහාය
Warranty information for the KGUSS FX-AUDIO- L06 amplifier is typically provided at the point of purchase or included with the product packaging. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support or service inquiries, please contact your retailer or the manufacturer directly.
