SINOTIMER TM922 Dual Channel Programmable Digital Timer Switch

1. හැඳින්වීම සහ අවසන්view

The SINOTIMER TM922 is a versatile dual-channel programmable digital timer switch designed for precise control of electrical equipment. It features two independent relay outputs, allowing simultaneous control of two separate devices or systems. With up to 8 ON/OFF programs per day and 15 combinations per week, this timer provides flexible scheduling options. Its accurate-to-the-second control ensures reliable operation according to preset programs, cycling weekly or daily from one second to 168 hours. Programs are saved by a battery backup in case of power failure, and the replaceable battery ensures long-term usage. The device is designed for DIN standard 35mm mounting, making it easy to install in DB boxes.

රූපය 1: ඉදිරිපස view of the SINOTIMER TM922 Digital Timer Switch.

2 ආරක්ෂිත තොරතුරු

Please read all instructions carefully before installation and operation. Incorrect installation or use can lead to electric shock, fire, or damage to the device. Ensure power is disconnected before any wiring or maintenance. This device should be installed by a qualified electrician in accordance with local electrical codes. Do not expose the device to moisture or extreme temperatures. Keep out of reach of children.

3. නිෂ්පාදන ලක්ෂණ

• Dual Independent Relays: Two separate 16A outputs for controlling two distinct devices.
• වැඩසටහන්ගත කළ හැකි කාලසටහන්: Up to 8 ON/OFF programs per day, with 15 weekly combinations.
• නිශ්චිත වේලාව: Accurate to the second, with cycles from 1 second to 168 hours.
• මතක උපස්ථ: Built-in battery saves programs during power outages.
• ප්රතිස්ථාපනය කළ හැකි බැටරි: Ensures long product life.
• DIN රේල් සවිකිරීම: Standard 35mm design for easy installation in electrical panels.
• විශාල LCD සංදර්ශකය: Clear blue backlight for easy readability.

Figure 2: Close-up of the TM922's LCD display and control buttons.

4. පැකේජ අන්තර්ගතය

• SINOTIMER TM922 Digital Timer Switch
• One screwdriver
• පරිශීලක අත්පොත (මෙම ලේඛනය)

5. පිරිවිතර

6. සැකසුම සහ ස්ථාපනය

6.1 DIN දුම්රිය සවි කිරීම

The TM922 is designed for standard 35mm DIN rail mounting. To install, align the timer with the DIN rail and press firmly until it clicks into place. Ensure it is securely fastened.

රූපය 3: පැත්ත view DIN රේල් සවිකිරීමේ යාන්ත්‍රණය නිදර්ශනය කිරීම.

6.2 රැහැන් සටහන

අවවාදයයි: Disconnect all power before wiring. Wiring should be performed by a qualified professional.

The TM922 features terminals for power input (L, N) and two independent relay outputs (C1, C2). Each output has common (C), normally open (NO), and normally closed (NC) contacts. Refer to the labels on the device for precise terminal identification.

• බල ආදානය: Connect your 85-265VAC power supply to the 'L' (Live) and 'N' (Neutral) terminals.
• Channel 1 Output (C1): Connect your first load to the C1 terminals. For normally open operation, connect the load between the common (C1-4) and normally open (C1-5) terminals. For normally closed operation, connect between common (C1-4) and normally closed (C1-6) terminals.
• Channel 2 Output (C2): Connect your second load to the C2 terminals. For normally open operation, connect the load between the common (C2-1) and normally open (C2-2) terminals. For normally closed operation, connect between common (C2-1) and normally closed (C2-3) terminals.

Figure 4: Wiring terminals for power input and dual relay outputs.

7. මෙහෙයුම් උපදෙස්

7.1 බොත්තම් කාර්යයන්

Figure 5: Control button functions for the TM922.

• මෙනු: Unlock/Lock buttons, Enter program settings.
• ▲ (Up Arrow): Increase value, Navigate up.
• ▼ (Down Arrow): Decrease value, Navigate down.
• හරි: Select, Confirm settings.
• Res (Reset): Channel selection, Sleep mode, Remove programs. (Requires a pointed object like a pen or the provided screwdriver).

7.2 Locking/Unlocking the Timer

To prevent accidental changes, the timer can be locked. Press and hold the මෙනුව button for more than 3 seconds to lock or unlock the timer. The 'LOCK' indicator on the display will show the current status.

7.3 වත්මන් වේලාව සැකසීම

1. Ensure the timer is unlocked.
2. ඔබන්න OK button repeatedly to cycle through and select the minute, hour, second, and day of the week.
3. භාවිතා කරන්න ▲ සහ ▼ buttons to adjust the selected number.
4. ඔබන්න OK එක් එක් සැකසුම තහවුරු කිරීමට.

7.4 Manual Control (Working Status)

To manually override the programmed settings for a channel, press the මෙනුව සහ ▲ buttons together. This will cycle the working status through: ON, ON AUTO, OFF, AUTO OFF. The current status will be displayed (e.g., F1 ON, F2 OFF).

7.5 Switching Channels (F1/F2)

To switch between Channel 1 (F1) and Channel 2 (F2) for programming or manual control, press the recessed Res button using a pointed object. The display will show 'F1' or 'F2' to indicate the active channel.

7.6 චක්‍ර සක්‍රිය/අක්‍රිය කිරීම ක්‍රමලේඛනය කිරීම

The TM922 supports up to 8 ON/OFF programs for each channel (F1 and F2), totaling 16 ON/OFF events per channel. Each program can be set for specific days of the week.

1. Ensure the timer is unlocked.
2. Select the desired channel (F1 or F2) by pressing the Res බොත්තම.
3. ඔබන්න මෙනුව button to enter the program setting mode. The display will show '1 ON' (for the first ON program).
4. ඔබන්න OK to select the time setting for '1 ON'. Use ▲ සහ ▼ to adjust the hour, minute, and second. Press OK එක් එක් ගැලපීමෙන් පසු.
5. After setting the time, you can select the days of the week for this program. Use ▲ සහ ▼ to cycle through various day combinations (e.g., Mo Tu We Th Fr Sa Su, Mo-Fr, Sa Su, etc.). Press OK තහවුරු කිරීමට.
6. The display will then show '1 OFF'. Repeat steps 4 and 5 to set the OFF time and days for the first program.
7. දිගටම ඔබන්න මෙනුව to cycle through '2 ON', '2 OFF', up to '8 ON', '8 OFF' for the current channel, setting each as needed.
8. Once all programs are set, press and hold මෙනුව to exit programming mode and return to the main clock display.

8. නඩත්තු කිරීම

8.1 බැටරි ප්රතිස්ථාපනය

The TM922 uses a replaceable battery to maintain program settings during power outages. If the display becomes dim or settings are frequently lost, the battery may need replacement. Refer to the device's internal compartment for battery type and replacement instructions. Ensure power is disconnected before replacing the battery.

8.2 පිරිසිදු කිරීම

Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing හෝ සංදර්ශකය.

9. දෝශ නිරාකරණය

• Timer not switching:
  • Check if the timer is in 'AUTO ON' or 'AUTO OFF' mode. Use manual control to switch to 'AUTO ON' for programmed operation.
  • Verify that the ON/OFF programs are correctly set for the desired times and days.
  • Ensure the device is receiving power.
• බලය ඇණහිටීමෙන් පසු සැකසුම් නැති වියtage:
  • The internal backup battery may be depleted or faulty. Replace the battery.
• ප්‍රතිචාර නොදක්වන බොත්තම්:
  • Ensure the timer is unlocked (press and hold MENU for 3 seconds).
  • If the 'Res' button is stuck, gently try to release it. Avoid pressing too hard.
• සංදර්ශකය අඳුරු හෝ හිස් ය:
  • බල සැපයුම පරීක්ෂා කරන්න.
  • Replace the internal backup battery.

10. වගකීම් සහ සහාය

This SINOTIMER product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact SINOTIMER customer support. For technical assistance, troubleshooting, or spare parts, please visit the official SINOTIMER webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුවට සම්බන්ධ වන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

වෙත පිවිසෙන්න SINOTIMER Store වැඩි විස්තර සඳහා.