SwitchBot Matte Relay Switch 1PM User Manual

1. නිෂ්පාදන අවසන්view

The SwitchBot Matte Relay Switch 1PM is a compact, power-measuring relay switch module designed to integrate existing appliances and lighting into your smart home system. It features Wi-Fi and Bluetooth connectivity, an integrated Bluetooth repeater, and compatibility with major smart home platforms like Alexa, Apple Home, and Google Home. This device allows for remote control, scheduling, and energy monitoring of connected devices.

Image: SwitchBot Relay Switch 1PM highlighting its control capabilities, Bluetooth, Wi-Fi, and Matter compatibility.

2. පෙට්ටියේ ඇති දේ

• Relay Switch 1PM (x1)
• පරිශීලක අත්පොත (x1)

3. Safety Information and Installation Guidelines

Your safety is paramount. When installing this device, always adhere to your country's standards for electrical installation. Before commencing any mounting or installation, ensure that the circuit breakers are turned off and verify there is no voltage on the terminals. Once you confirm the absence of voltage, you may proceed with wiring. Consult the user guide thoroughly before beginning installation.

This video is for demonstration purposes only. It is highly recommended to hire a professional electrical installer for device installation. Wire colors may vary based on regional standards. Always follow local regulations and standards.

3.1. රැහැන් උපදෙස්

1. බලය අක්රිය කරන්න: Locate the circuit breaker for the area where you will install the relay switch and switch off the power. Verify with a voltagවිදුලිය විසන්ධි වී ඇති බව පරීක්ෂා කරන්න.
2. උදාසීන වයරය සම්බන්ධ කරන්න: Connect the neutral wire (typically blue) to the 'N' terminal on the Relay Switch 1PM.
3. සජීවී වයරය සම්බන්ධ කරන්න: Connect the live wire (typically brown or red) to the 'L' terminal on the Relay Switch 1PM.
4. පැටවුම් වයරය සම්බන්ධ කරන්න: Connect the load wire (the wire going to your light fixture or appliance) to the 'O' terminal on the Relay Switch 1PM.
5. Connect Switch Wires: Connect the existing wall switch wires to the 'SW' and 'L' terminals on the Relay Switch 1PM. This allows the physical switch to control the relay.
6. Reinstall Switch Shell: Carefully place the Relay Switch 1PM into the wall box and reinstall the switch shell.
7. බලය ප්‍රතිස්ථාපනය කරන්න: පරිපථ කඩනය නැවත ක්‍රියාත්මක කරන්න.

Image: Wiring diagram for the SwitchBot Relay Switch 1PM.

රූපය: උදාample of the Relay Switch 1PM installed behind an existing wall switch.

4. මෙහෙයුම් උපදෙස්

4.1. Initial Setup and App Control

1. Download the SwitchBot App: ඒ සඳහා සොයන්න "SwitchBot" in your smartphone's app store and download the application.
2. උපාංගය එක් කරන්න: Open the app, create an account or log in, and follow the on-screen instructions to add the Relay Switch 1PM. Ensure your phone's Bluetooth is enabled during this process.
3. Wi-Fi වෙත සම්බන්ධ වන්න: During setup, connect the device to your 2.4 GHz Wi-Fi network for remote control and smart home integration.
4. යෙදුම හරහා පාලනය කරන්න: Once connected, you can use the SwitchBot app to turn the connected appliance or light on/off, set schedules, and monitor energy usage.

Image: SwitchBot app displaying real-time energy monitoring data.

4.2. Smart Home Integration (Matter Certified)

The Relay Switch 1PM is Matter certified, allowing for broad compatibility with various smart home platforms including Apple Home, Alexa, Google Home, and SmartThings. A compatible smart speaker or hub may be required for full functionality with certain platforms.

• Apple Home: Requires connection to the Matter network.
• Alexa/Google Home/SmartThings: Requires a compatible speaker or hub for direct control.

Image: Matter certification and smart home platform compatibility.

4.3. Bluetooth Repeater Function

The Relay Switch 1PM includes an integrated Bluetooth repeater, which supports networking with up to 10 SwitchBot Bluetooth sub-devices. This extends the range and reliability of your SwitchBot ecosystem, allowing you to remotely view and operate these devices and integrate them into automations.

Image: The Relay Switch 1PM functioning as a Bluetooth repeater for other SwitchBot devices.

4.4. බලශක්ති නිරීක්ෂණ

The device provides real-time power consumption data and historical charts through the SwitchBot app. This feature helps analyze power usage for the connected channel, contributing to energy management and potential electricity bill savings. One year of free cloud data storage is included.

Image: Energy monitoring data displayed on the SwitchBot app and a laptop.

5. නඩත්තු කිරීම

• පිරිසිදු කිරීම: Use a dry, soft cloth to clean the device. Do not use liquid cleaners or aerosols.
• ස්ථිරාංග යාවත්කාලීන කිරීම්: Regularly check the SwitchBot app for available firmware updates to ensure optimal performance and security.
• පාරිසරික තත්ත්වයන්: Ensure the device is installed in a dry environment, away from direct sunlight and extreme temperatures, to prolong its lifespan.

6. දෝශ නිරාකරණය

• උපාංගය ප්‍රතිචාර නොදක්වයි: Check if the power is on at the circuit breaker. Ensure the device is properly wired. Verify Wi-Fi connectivity in the SwitchBot app.
• සම්බන්ධතා ගැටළු: Ensure your Wi-Fi router is operating on a 2.4 GHz band. Move the device closer to the router if possible. Restart the device and your router.
• App Control Delays: Check your internet connection speed. Ensure the SwitchBot app is updated to the latest version.
• භෞතික ස්විචය ක්‍රියා නොකරයි: Verify the wiring to the 'SW' and 'L' terminals. Ensure the physical switch itself is functional.
• Matter Integration Problems: Ensure your Matter controller (e.g., Apple HomePod, Google Nest Hub) is updated and properly configured. Firmware updates for the Relay Switch 1PM are crucial for Matter compatibility.

7. පිරිවිතර

Image: Dimensions of the compact Relay Switch 1PM.

8. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the official SwitchBot website or contact SwitchBot customer service directly. Keep your purchase receipt for warranty claims.