DrayTek Router Time Setup Owner’s Manual

DrayTek Router Time Setup

 

පිරිවිතර

• Time Setup Options: Computer Time Base via HTTP, NTP Client
• ක්‍රියාකාරීත්වය: Time-based functions like Call Schedule

නිෂ්පාදන භාවිත උපදෙස්

Setting Up Time Base Using a Web බ්රවුසරය

1. Ensure your computer’s time is accurate.
2. වෙත ලොග් වන්න Web Configurator and click on Time Setup.
3. Select ‘Use Browser Time’ and click OK.
4. Click Time Setup again and press ‘Inquire Time’ to set the time base to the router.
5. The Current System Time block will show the exact time information from your computer.

Setting Up Time Base Using Time Client

1. Click the OK button, wait for a few seconds for the time client to get the time base from the specified time server.
2. Click Time Setup again to verify the Current System Time information.

හැඳින්වීම

• The router has two different ways to set up time base: one is using computer time base via HTTP protocol, another is using NTP ( Network Time Protocol) client to get time base from the time server.
• If you want to use any time-based function (ex. Call Schedule), the system time function should work properly in advance.

මානකරනය

• Set Time Base Using Web බ්රවුසරය
  1. Before setting the time base using a web browser, you have to make sure that the computer time is exact or not. Login Web Configurator -> click Time Setup.
  2. Select Use Browser Time and click the OK button. Click Time Setup again and push Inquire Time to set the time base to the router.
  3. The Current System Time block will display exact time inforamtion as your computer.

Set Time Base Using Time Client

1. Before setting up the time base using the time client, you have to make sure that the time server is working properly. If the time server is located on the Internet, you should also make sure the router has Internet access capability.
   • ඇතුල් වන්න Web Configurator -> click Time Setup.
2. Click Use Internet Time Client, choose Time Protocol as NTP, give an IP address of the time server in the Server IP Address, and then choose an exact time zone in the Time Zone and select an updated time interval in Automatically Update Interval.
   • The following is a given example.
3. Click the OK button, wait for a few seconds, and the client will get the time base from the specified time server. Click Time Setup again to check the Current System Time infor-mation as below.

නිතර අසන ප්රශ්න

Why is setting up the system time important?

Setting up the system time is crucial for using time-based functions like Call Schedule. It ensures accurate scheduling and operation of such features.

ලේඛන / සම්පත්

DrayTek Router Time Setup [pdf] හිමිකරුගේ අත්පොත Router Time Setup, Time Setup

යොමු කිරීම්

• පරිශීලක අත්පොත