FlySpark-logo

FlySpark F4 V1 Stack Flight Controller

FlySpark-F4-V1-Stack-Flight-Controller-productපිරිවිතර

  • නිෂ්පාදන නම:
    FlySpark F4 V1 BLS 60A තොගය
  • AI විශේෂාංග:
    Sensor Fusion, PID Autotuning, Adaptive Filtering
  • මෘදුකාංග සහාය:
    බීටාෆ්ලයිට්, INAV, ආර්ඩුපිලොට්, EMU-ෆ්ලයිට්, ස්කයිබ්‍රෂ්
  • ESC Communication:
    BLHeli_S බ්ලූටූත් සහ USB-C
  • සම්බන්ධතාවය:
    3-6S LiPo
  • මානය:
    47.8mm(L) x 47.5mm(W) x 18.3mm(H)
  • සවි කිරීම:
    30.5 x 30.5mm 4mm සිදුරු විශාලත්වය
  • බර:
    ග්රෑම් 34

FlySpark-F4-V1-Stack-Flight-Controller-fig-9 FlySpark-F4-V1-Stack-Flight-Controller-fig-10

නිෂ්පාදන භාවිත උපදෙස්

FlySpark F4 V1 පියාසැරි පාලකය

පිරිසැලසුම:
Refer to the user manual for the layout of the flight controller.

පර්යන්ත සම්බන්ධතාවය:
Connect peripherals as per the provided diagram.

යෙදුම් සහ FC වින්‍යාසය:
Use the recommended apps and follow the configuration instructions.

FC ස්ථිරාංග යාවත්කාලීන කිරීම:
Connect the flight controller to a PC via USB for firmware updates.

ෆ්ලයිස්පාර්ක් බීඑල්එස් 60ඒ 4-ඉන්-1 ඊඑස්සී

පිරිසැලසුම:
Check the layout guide in the manual for proper installation.

මෝටර් සහ බල කේබලය සමඟ සම්බන්ධතාවය:
Connect motors and power cables securely.

ESC වින්‍යාසය:
Use the FlySpark app for ESC configuration settings.

ESC ස්ථිරාංග යාවත්කාලීන කිරීම:
Follow the provided steps to update the firmware for ESC.

FlySpark F4 V1 BLS 60A තොගයFlySpark-F4-V1-Stack-Flight-Controller-fig-1

පිරිවිතර ඉවරයිviewFlySpark-F4-V1-Stack-Flight-Controller-fig-20

FlySpark-F4-V1-Stack-Flight-Controller-fig-2 FlySpark-F4-V1-Stack-Flight-Controller-fig-3

පැකේජයFlySpark-F4-V1-Stack-Flight-Controller-fig-4.1

  • FlySpark F4 V1 Flight Controller x 1
  • FlySpark BLS 60A 4-in-1 ESC x 1
  • 35V 1000uF අඩු ESR ධාරිත්‍රකය x 1
  • M3 නයිලෝන් නට් x 4
  • SH 1.0mm 25mm-දිග 8pin කේබල් (FC-ESC සම්බන්ධතාවය සඳහා) x 1 SH 1.0mm 75mm-දිග 6pin කේබල්* x 1
  • M3*30mm Iner-hexagon Screws x 4
  • DJI 6pin කේබල් (80mm) x 1
  • XT60 බල කේබලය(100mm) x 1

FlySpark-F4-V1-Stack-Flight-Controller-fig-5.2

FC සම්බන්ධතා රූප සටහනFlySpark-F4-V1-Stack-Flight-Controller-fig-6

FC සහ ESC සම්බන්ධතා සඳහා මාර්ගෝපදේශය

ක්රමය 1:

  • Using 8.Pin JST CableFlySpark-F4-V1-Stack-Flight-Controller-fig-7

ක්රමය 2:

සෘජු පෑස්සුම්

  • පහත පෑඩ් අර්ථ දැක්වීම් අනුගමනය කරමින්, එක් එක් කෙළවරේ ඇති පෑඩ් 8 ට වයර් 8 ක් පෑස්සුම් කරන්න.FlySpark-F4-V1-Stack-Flight-Controller-fig-8

පියාසැරි පාලක පිරිවිතර

FlySpark-F4-V1-Stack-Flight-Controller-fig-11.2

  • O6 වායු ඒකකය සමඟ එන 3-pin කේබල් භාවිතා කරන්න FlySpark-F4-V1-Stack-Flight-Controller-fig-12.1
  • FlySpark F4 V1 BLS 60A Stack එක සමඟ එන 6-pin කේබලය භාවිතා කරන්න.

FlySpark-F4-V1-Stack-Flight-Controller-fig-13

F C Firmware  update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:

  • Use a USB cable to connect the FlySpark F4 VI flight controller to your PC

Open Betaflight I INAV Configurator.

  • . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an example.

Navigate to Firmware Flashing:

  • In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.

Select Target and Flash Firmware:

  •  Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
  • Initiate the firmware flashing process.

සටහන:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be  performed using a USB connection to your PC.

FlySpark-F4-V1-Stack-Flight-Controller-fig-14

Flyspark BLS 60A 4-in-l ESCFlySpark-F4-V1-Stack-Flight-Controller-fig-15

මෝටර් සහ බල කේබලය සමඟ සම්බන්ධ වීමFlySpark-F4-V1-Stack-Flight-Controller-fig-16

ESC Specs FlySpark F4 V1 BLS 60A StackFlySpark-F4-V1-Stack-Flight-Controller-fig-17

ESC ස්ථිරාංග යාවත්කාලීන කිරීම
මෙම 8-bit 50A ESC එක BLHeliS ස්ථිරාංග සමඟ පූර්ව-පූරණය කර ඇති නමුත් Bluejay ස්ථිරාංග වෙත ෆ්ලෑෂ් කළ හැකි අතර, RPM පෙරහන සහ ද්වි-දිශානුගත Dshot සහාය ලබා දෙයි. ස්ථිරාංග යාවත්කාලීන කිරීමට මෙම පියවර අනුගමනය කරන්න:

  1. Prepare Your Drone:
    Remove all propellers from your drone for safety.
  2. Connect ESC to Flight Controller:
    Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly.
  3. පරිගණකයට සම්බන්ධ කරන්න:
    Use a USB Type-C cable to connect the flight controller to your computer.
  4. Access Firmware Configuration:
    Open the Chrome browser and visit: www.esc-configurator.com
  5. Flashing Steps:
    Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.

FlySpark-F4-V1-Stack-Flight-Controller-fig-21

අවවාදයන්:FlySpark-F4-V1-Stack-Flight-Controller-fig-19

නිතර අසන පැන

ESC ස්ථිරාංග යාවත්කාලීන කරන්නේ කෙසේද?

To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.

ලේඛන / සම්පත්

FlySpark F4 V1 Stack Flight Controller [pdf] පරිශීලක අත්පොත
F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller

යොමු කිරීම්

කමෙන්ට් එකක් දාන්න

ඔබගේ විද්‍යුත් තැපැල් ලිපිනය ප්‍රකාශනය නොකෙරේ. අවශ්‍ය ක්ෂේත්‍ර සලකුණු කර ඇත *