Jura Milk System Cleaner Mini-Tabs with Dispenser (180g) Instruction Manual

1. හැඳින්වීම

The Jura Milk System Cleaner Mini-Tabs are designed to maintain the hygiene and performance of your Jura coffee machine's fine foam technology. This product effectively removes milk fats and proteins from the milk tubes, ensuring consistently fine and light milk foam for your specialty coffees.

Image: Jura Milk System Cleaner Mini-Tabs in a 180g bottle with dispenser.

2. සැකසීම සහ සකස් කිරීම

Before initiating the cleaning process, ensure your Jura coffee machine is powered on and ready for maintenance. The machine will typically prompt you when a milk system cleaning is required.

2.1 Preparing the Cleaner Solution

1. Locate the milk system cleaning container provided with your Jura machine.
2. Fill the container with 500 ml of fresh water.
3. Dispense one dose of Jura Milk System Cleaner Mini-Tabs using the integrated dispenser into the water. The dispenser ensures the correct amount is used.
4. Stir gently until the mini-tabs are dissolved. Lukewarm water may aid dissolution.

Image: Close-up of the Jura Milk System Cleaner Mini-Tabs bottle, showing the dispenser mechanism.

3. Operating Instructions for Milk System Cleaning

Follow the on-screen prompts of your Jura coffee machine to initiate the milk system cleaning program. The machine will guide you through each step.

1. Connect the milk tube from your coffee machine to the prepared cleaning container.
2. Place the cleaning container under the milk spout.
3. Start the "Clean the milk system" program on your Jura machine. The machine will draw the cleaning solution through the milk system.
4. Once the machine indicates, remove the cleaning container and rinse it thoroughly with clean water.
5. Refill the container with fresh water and re-connect it to the milk tube.
6. Continue the cleaning program as prompted by the machine. This step rinses the system with clean water.
7. The machine will indicate when the milk system cleaning is complete.

3.1 Visual Guide: Milk System Cleaning Process

4. නඩත්තුව සහ රැකවරණය

• Regular cleaning of the milk system is crucial for maintaining the quality of your milk foam and extending the lifespan of your machine.
• Always use original Jura maintenance products to ensure compatibility and effectiveness.
• After each use of the milk system, perform a quick rinse cycle as recommended by your machine to prevent immediate milk residue buildup.
• Periodically clean the drip tray and coffee grounds container with mild soap and water, allowing them to air dry completely before reinserting.

5. දෝශ නිරාකරණය

5.1 Tabs Not Dissolving Properly

If the mini-tabs are not dissolving completely in the cleaning container:

• Ensure you are using fresh water.
• Try using lukewarm water to aid dissolution.
• Stir the solution thoroughly before connecting to the machine.

5.2 Poor Milk Foam Quality After Cleaning

If milk foam quality is still poor after a cleaning cycle:

• Verify that all milk system components (milk tube, connectors, frother nozzle) are correctly assembled and free from blockages.
• Ensure the milk being used is fresh and cold.
• Perform another milk system cleaning cycle to ensure all residues are removed.

6. නිෂ්පාදන පිරිවිතර

7. වගකීම් සහ සහාය

For product support, warranty information, or further assistance, please refer to the official Jura website or contact Jura customer service directly. Always use original Jura maintenance products to ensure optimal performance and to maintain your machine's warranty.

Official Jura Webඅඩවිය: www.jura.com